Difficulty

Moderate

Steps

10

Time Required

                          25 minutes

Sections

1

  • Buttons
  • 10 steps

Flags

Slice and Dice

The steps in this guide should be split up and made into a series of prerequisite guides.

  • BackDell Axim X30

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

What you need

Step 1

              Buttons
  • Remove the four rubber feet with your fingers.

Remove the four rubber feet with your fingers.

1024

Step 2

  • Insert the nylon spudger into the battery cover release slot to remove the battery from the device.

Insert the nylon spudger into the battery cover release slot to remove the battery from the device.

Step 3

  • Remove four 12.7mm JIS #0 screws.

Remove four 12.7mm JIS #0 screws.

Step 4

  • Remove the back panel with a plastic opening tool. Follow the edge of the device around the entire perimeter.
  • The back panel will pop off easily.

Remove the back panel with a plastic opening tool. Follow the edge of the device around the entire perimeter.

The back panel will pop off easily.

Step 5

  • Disconnect ribbon cables.
  • You may need to use a little force to disconnect them.
  • Disconnect red and white wired connector for speaker and motherboard battery.

Disconnect ribbon cables.

You may need to use a little force to disconnect them.

Disconnect red and white wired connector for speaker and motherboard battery.

Step 6

  • Remove three 12.7mm JIS #0 screws.

Remove three 12.7mm JIS #0 screws.

Step 7

  • Carefully remove motherboard.

Carefully remove motherboard.

Step 8

  • Remove the two 9.6 mm screws by the speaker and green battery with a JIS #0 screwdriver.

Remove the two 9.6 mm screws by the speaker and green battery with a JIS #0 screwdriver.

Step 9

  • Remove black plastic board.

Remove black plastic board.

Step 10

  • Remove grey and green membrane buttons.

Remove grey and green membrane buttons.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      One other person completed this guide.

Author

                                      with 3 other contributors 


                    Jonathan Gulley

Member since: 03/28/2018

187 Reputation

                                      1 Guide authored                  



                       Badges:
                       4







                                                        +1 more badge

Team

                       IUPUI, Team S2-G5, Harley Spring 2018                        

                                                  Member of IUPUI, Team S2-G5, Harley Spring 2018 



                    IUPUI-HARLEY-S18S2G5                     


                                            3 Members                     


                                            2 Guides authored