Difficulty

Easy

Steps

11

Time Required

                          20 - 40 minutes

Sections

1

  • Hard Drive
  • 11 steps

Flags

Member-Contributed Guide

An awesome member of our community made this guide. It is not managed by iFixit staff.

  • BackDell Alienware M17x R3

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

What you need

Step 1

              Loosen the Captive Screws
  • WARNING: Before working inside your computer, read the safety information that shipped with your computer.
  • CAUTION: To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal surface (such as a connector on your computer).
  • Loosen the three captive screws that se cure the hard-drive assembly to the computer base.

WARNING: Before working inside your computer, read the safety information that shipped with your computer.

CAUTION: To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal surface (such as a connector on your computer).

Loosen the three captive screws that se cure the hard-drive assembly to the computer base.

1024

Step 2

              Lifting the Hard-Drive
  • Using the pull-tab, lift the hard-drive assembly to disconnect it from the connector on the system board.

Using the pull-tab, lift the hard-drive assembly to disconnect it from the connector on the system board.

Step 3

              Lifting the Hard-Drive Assembly
  • Lift the hard-drive assembly out of the computer base.

Lift the hard-drive assembly out of the computer base.

Step 4

              Remove the Screws
  • Remove the four screws that secure the hard drive to the hard-drive bracket.

Remove the four screws that secure the hard drive to the hard-drive bracket.

Step 5

              Lifting the Hard-Drive
  • Lift the hard-drive off the hard-drive bracket.

Lift the hard-drive off the hard-drive bracket.

Step 6

              Remove the Interposer
  • Remove the interposer from the hard drive.

Remove the interposer from the hard drive.

Step 7

              Connecting the Interposer
  • Connect the interposer to the NEW hard drive.

Connect the interposer to the NEW hard drive.

Step 8

              Placing the Hard Drive
  • Place the hard drive in the hard-drive bracket.

Place the hard drive in the hard-drive bracket.

Step 9

              Replace the Screws
  • Replace the four screws that secure the hard drive to the hard-drive bracket.

Replace the four screws that secure the hard drive to the hard-drive bracket.

Step 10

              Align the Connector
  • Align the connector on the hard drive with the connector on the system board and press the hard drive until it is fully seated.

Align the connector on the hard drive with the connector on the system board and press the hard drive until it is fully seated.

Step 11

              Tighten the Screws
  • Tighten the three captive screws that secure the hard-drive assembly to the computer base.

Tighten the three captive screws that secure the hard-drive assembly to the computer base.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Author

                                      with 1 other contributor 


                    Terrence15

Member since: 12/18/2017

78,526 Reputation

                                      441 Guides authored                  



                       Badges:
                       28







                                                        +25 more badges

Team

                       Informative Technologies Inc.                        

                                                  Member of Informative Technologies Inc. 



                    Community                     


                                            38 Members                     


                                            1,980 Guides authored