Difficulty
Easy
Steps
11
Time Required
25 - 40 minutes
Sections
1
- Display Assembly
- 11 steps
Flags
Member-Contributed Guide
An awesome member of our community made this guide. It is not managed by iFixit staff.
BackDell Alienware M17x R3
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
Loosen the Screws
- Loosen the two captive screws that secure the display cable to the system board.
Loosen the two captive screws that secure the display cable to the system board.
1024
Step 2
Disconnecting the Display Cable
- Using the pull-tab, pull the display cable to disconnect the display cable from the connector on the system board.
Using the pull-tab, pull the display cable to disconnect the display cable from the connector on the system board.
Step 3
Disconnecting the Camera Cable
- Disconnect the camera cable and infrared cable from the respective system board connectors.
Disconnect the camera cable and infrared cable from the respective system board connectors.
Step 4
Remove the Cables
- Note the routing of the display cable, camera cable, infrared cable, wirelessHD card cable, Mini-Card antenna cables and remove the cables from the routing guides on the palm rest assembly.
Note the routing of the display cable, camera cable, infrared cable, wirelessHD card cable, Mini-Card antenna cables and remove the cables from the routing guides on the palm rest assembly.
Step 5
Remove the Screws
- Remove the six screws that secure the display assembly to the computer base.
Remove the six screws that secure the display assembly to the computer base.
Step 6
Removing the Display Assembly
- Lift the display assembly off the computer.
Lift the display assembly off the computer.
Step 7
Securing the Display Assembly
- Place the NEW display assembly in position and replace the six screws that secure the display assembly to the computer base.
Place the NEW display assembly in position and replace the six screws that secure the display assembly to the computer base.
Step 8
Route the Cables
- Route the display cable, camera cable, infrared cable, wirelessHD card cable, and Mini-Card antenna cables through the routing guides on the palm rest assembly.
Route the display cable, camera cable, infrared cable, wirelessHD card cable, and Mini-Card antenna cables through the routing guides on the palm rest assembly.
Step 9
Connecting the Display Cable
- Connect the display cable to the connector on the system board.
Connect the display cable to the connector on the system board.
Step 10
Tighten the Screws
- Tighten the two captive screws that secure the display cable to the system board.
Tighten the two captive screws that secure the display cable to the system board.
Step 11
Connect the Camera Cable
- Connect the camera cable and infrared cable to the respective system board connectors.
Connect the camera cable and infrared cable to the respective system board connectors.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
Author
with 1 other contributor
Terrence15
Member since: 12/18/2017
78,526 Reputation
441 Guides authored
Badges:
28
+25 more badges
Team
Informative Technologies Inc.
Member of Informative Technologies Inc.
Community
38 Members
1,980 Guides authored