Difficulty

Easy

Steps

8

Time Required

                          4 - 20 minutes

Sections

1

  • Base Cover
  • 8 steps

Flags

2

Member-Contributed Guide

An awesome member of our community made this guide. It is not managed by iFixit staff.

Missing Details

Some of this guide’s details are missing. Help users by adding tools, difficulty, or time.

  • BackDell Alienware 13 R3

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

What you need

Step 1

              Loosen the Screws
  • WARNING: Before working inside your computer, read the safety information that shipped with your computer and follow the steps in Before Working Inside Your Computer. After working inside your computer, follow the instructions in After Working Inside Your Computer.
  • Loosen the five captive screws that secure the base cover to the computer base.

WARNING: Before working inside your computer, read the safety information that shipped with your computer and follow the steps in Before Working Inside Your Computer. After working inside your computer, follow the instructions in After Working Inside Your Computer.

Loosen the five captive screws that secure the base cover to the computer base.

1024

Step 2

              Pry the Base Cover
  • Using a plastic scribe, gently pry the base cover to release the tabs on the base cover from the slots on the computer base.

Using a plastic scribe, gently pry the base cover to release the tabs on the base cover from the slots on the computer base.

Step 3

              Lift the Base Cover
  • Lift the base cover off the computer base.

Lift the base cover off the computer base.

Step 4

              Disconnect the Battery Cable
  • Using a plastic scribe, disconnect the battery cable from the system board.

Using a plastic scribe, disconnect the battery cable from the system board.

Step 5

              Press and Hold the Power-Button
  • Press and hold the power button for five seconds to ground the system board.

Press and hold the power button for five seconds to ground the system board.

Step 6

              Connect the Battery Cable
  • Connect the battery cable to the system board.

Connect the battery cable to the system board.

Step 7

              Slide the Tabs
  • Slide the tabs on the NEW base cover into the slots on the computer base and snap the base cover into place

Slide the tabs on the NEW base cover into the slots on the computer base and snap the base cover into place

Step 8

              Tighten the Five Captive Screws
  • Tighten the five captive screws that secure the base cover to the computer base.

Tighten the five captive screws that secure the base cover to the computer base.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Author

                                      with 2 other contributors 


                    Terrence15

Member since: 12/18/2017

78,526 Reputation

                                      441 Guides authored                  



                       Badges:
                       28







                                                        +25 more badges

Team

                       Informative Technologies Inc.                        

                                                  Member of Informative Technologies Inc. 



                    Community                     


                                            38 Members                     


                                            1,980 Guides authored