Dell 3100 Touch Battery Replacement Repair Guide

Difficulty

Moderate

Steps

6

Time Required

Suggest a time??

Sections

3

• Bottom Cover
• 1 step
• Battery
• 2 steps
• Battery
• 3 steps

Flags

4

Member-Contributed Guide

An awesome member of our community made this guide. It is not managed by iFixit staff.

Grammar Police

Embrace your inner English teacher and help improve this guide’s grammar!

Bullets!

Better coordination with markups and the color/type of bullets will help make this guide more clear!

In Progress

This guide is a work in progress. Reload periodically to see the latest changes!

• BackDell 3100 Chromebook (Touch)

• Full Screen

• Options

• History

• Save to Favorites

• Download PDF

• Edit

• Translate

• Get Shareable Link

• Embed This Guide

• Notify Me of Changes

• Stop Notifications

Step 1

              Detach Bottom Cover               

• Unscrew the nine PH#0 captive screws on the bottom of the device.
• Use a pick to run along the outside of the device popping all the clips. Prying should not be necessary.

Unscrew the nine PH#0 captive screws on the bottom of the device.

Use a pick to run along the outside of the device popping all the clips. Prying should not be necessary.

1024

Step 2

              Unplug the battery               

• Pull carefully, but firmly, on the battery cable until it becomes detached.

Pull carefully, but firmly, on the battery cable until it becomes detached.

Step 3

              Remove the battery               

• Remove these three M2x5 screws and take the battery out
• If your replacement battery doesn’t come with a cable, you will need to remove the cable from the old battery before disposing of it.
• DO NOT throw batteries in the trash. Take them to a proper battery recycling center.

Remove these three M2x5 screws and take the battery out

If your replacement battery doesn’t come with a cable, you will need to remove the cable from the old battery before disposing of it.

DO NOT throw batteries in the trash. Take them to a proper battery recycling center.

Step 4

              Battery               

• Use a plastic spudger to lift up the flap. Use the flap to pull the connector straight away from the board (towards the battery).

Use a plastic spudger to lift up the flap. Use the flap to pull the connector straight away from the board (towards the battery).

Step 5

• Remove 3 M2x4 screws

Remove 3 M2x4 screws

Step 6

• Use a spudger to detach the tab, and pull the tab up away from the device. This will break the adhesive holding in the battery.

Use a spudger to detach the tab, and pull the tab up away from the device. This will break the adhesive holding in the battery.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Author

                                      with 1 other contributor 

                    Isaac                     

956 Reputation

                                      7 Guides authored                  



                       Badges:
                       10







                                                        +7 more badges