Difficulty
Easy
Steps
5
Time Required
15 minutes
Sections
1
- CMOS Battery
- 5 steps
Flags
Member-Contributed Guide
An awesome member of our community made this guide. It is not managed by iFixit staff.
BackDELL 2335 DN
Full Screen
Options
History
Save to Favorites
Download PDF
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
What you need
Step 1
Remove attachments
- Remove power cord, network cable, etc.
- Remove paper tray and rear paper guide.
Remove power cord, network cable, etc.
Remove paper tray and rear paper guide.
1024
Step 2
Remove the cover of the expansion slot
- Slide the cover of the expansion slot backwards and open.
- Unhook the flap from the lower hinge.
Slide the cover of the expansion slot backwards and open.
Unhook the flap from the lower hinge.
Step 3
Release left housing part
- Loosen and remove front screws (1x top, 1x bottom) and rear (1x top, 1x bottom) with Phillips screwdriver.
Loosen and remove front screws (1x top, 1x bottom) and rear (1x top, 1x bottom) with Phillips screwdriver.
Step 4
Remove left housing part
- Carefully loosen the front and rear housing parts with a light pull from the left.
- Remove the left housing by carefully loosening the 3 clamps on the floor.
Carefully loosen the front and rear housing parts with a light pull from the left.
Remove the left housing by carefully loosening the 3 clamps on the floor.
Step 5
Replace Battery
- Replace battery.
Replace battery.
Follow the steps in reverse order to reassemble your device.
Cancel: I did not complete this guide.
One other person completed this guide.
These translators are helping us fix the world! Want to contribute? Start translating ›
Special thanks to these translators:
100%
irlanda
oldturkey03
Author
with 1 other contributor
Michael S.
Member since: 12/10/2017
463 Reputation
3 Guides authored
Badges:
6
+3 more badges