Difficulty

Moderate

Steps

10

Time Required

Suggest a time??

Sections

1

  • De’ Longhi CTOV 2103- AZ
  • 10 steps

Flags

Member-Contributed Guide

An awesome member of our community made this guide. It is not managed by iFixit staff.

  • BackToaster

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

What you need

Step 1

              Pull the lever
  • First unplug the cable. …Pull off the lever, it is snapped in.
  • Pull out the drawer.
  • Now clean it with a vacuum.
  • On the underside are 4 screws Torx 10 resistant visible - in each corner one.

First unplug the cable. …Pull off the lever, it is snapped in.

Pull out the drawer.

Now clean it with a vacuum.

On the underside are 4 screws Torx 10 resistant visible - in each corner one.

1024

Step 2

              Screw
  • Detail of the screw

Detail of the screw

Step 3

              Housing chrome plastic ring
  • here you have two pictures of the housing and the chrome plastic frame.

here you have two pictures of the housing and the chrome plastic frame.

Step 4

              Lever
  • Here you have details of the lever and how it is snapped in the mechanic.
  • This shows you how to unlock it when you dismantle the housing. Good luck. ;)

Here you have details of the lever and how it is snapped in the mechanic.

This shows you how to unlock it when you dismantle the housing. Good luck. ;)

Step 5

              Tempeaturesensor
  • Detail of the Sensor: It is the little black pearl at the black hoses which is strapped to the white hose.

Detail of the Sensor: It is the little black pearl at the black hoses which is strapped to the white hose.

Step 6

  • The connector from the main platine to the switch platine.

The connector from the main platine to the switch platine.

Step 7

  • Details of the plug and the bottom part after disassembly.
  • Where to find the plug for the yellow ground wire i show you in the next step. :)

Details of the plug and the bottom part after disassembly.

Where to find the plug for the yellow ground wire i show you in the next step. :)

Step 8

  • here you can see where the yellow cable belongs to.

here you can see where the yellow cable belongs to.

Step 9

              Reassembly
  • Reassembly: Putt all cables at the right places, don’t forget the yellow cable at the housing !!!
  • Look at the picture how to fit in the metal notch in the right place !

Reassembly: Putt all cables at the right places, don’t forget the yellow cable at the housing !!!

Look at the picture how to fit in the metal notch in the right place !

Step 10

  • Here the notch is in the right place.
  • Do NOT forget to make an insulation test. Check the wiring with a multimeter.
  • Made in China.
  • Hope it was fun and may the pictures help you. Greets. :)

Here the notch is in the right place.

Do NOT forget to make an insulation test. Check the wiring with a multimeter.

Made in China.

Hope it was fun and may the pictures help you. Greets. :)

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      2 other people completed this guide.

Author

                                      with 2 other contributors 


                    Schwarzstein

Member since: 07/15/2013

2,741 Reputation

                                      13 Guides authored                  



                       Badges:
                       21







                                                        +18 more badges