Dashcam Dod Ls300W Battery Replacement Repair Guide

Difficulty

Easy

Steps

4

Time Required

                          10 minutes            

Sections

1

• Battery
• 4 steps

Flags

Member-Contributed Guide

An awesome member of our community made this guide. It is not managed by iFixit staff.

• BackDashcam DOD LS300W

• Full Screen

• Options

• History

• Save to Favorites

• Download PDF

• Edit

• Translate

• Get Shareable Link

• Embed This Guide

• Notify Me of Changes

• Stop Notifications

Introduction

What you need

Step 1

              This is the dashcam DOD LS300W               

• Using an opening tool, pry open the seam on the bottom of the dash cam to separate the two parts of the device.

Using an opening tool, pry open the seam on the bottom of the dash cam to separate the two parts of the device.

1024

Step 2

• Notice the connection of + and - on the top left side of the inside of the dash cam. Make note of this as it will be important to remember when you solder on the new battery.
• Desolder the old battery. This is a 250mAh.

Notice the connection of + and - on the top left side of the inside of the dash cam. Make note of this as it will be important to remember when you solder on the new battery.

Desolder the old battery. This is a 250mAh.

Step 3

• The new battery is 400mAh. and fits just in the battery location.
• Solder in the new battery.
• Then place the new battery into the space previously occupied by the old battery.
• See the difference between old and new battery.
• Be careful to solder the positive side of the new battery into the same spot that the old battery was soldered into.

The new battery is 400mAh. and fits just in the battery location.

Solder in the new battery.

Then place the new battery into the space previously occupied by the old battery.

See the difference between old and new battery.

Be careful to solder the positive side of the new battery into the same spot that the old battery was soldered into.

Step 4

• Put the dashcam back together.
• Charge the battery to the full level, and you are ready to go.

Put the dashcam back together.

Charge the battery to the full level, and you are ready to go.

To reassemble your device, follow these instructions in reverse order.

Once again, thank you for checking out this guide and I hope it helped!

Cancel: I did not complete this guide.

                                                                                      2 other people completed this guide.                                             

Author

                                      with 4 other contributors 

                    Pierre                     

Member since: 04/02/2013

410 Reputation

                                      2 Guides authored                  



                       Badges:
                       13







                                                        +10 more badges                           

Russell Edwards - Jun 11, 2017

Reply

Hi mate, where did you buy the replacement battery from? I’m having trouble finding something online? blackdogwood@bigpond.com

Cheers,

Pierre - Jun 13, 2017

Reply

Hi Russell, I found this battery on Ebay.

Good luck.

Cheers.