D Link Hd Wi Fi Camera Camera Lens Replacement Repair Guide

Difficulty

Easy

Steps

Time Required

                          6 minutes

Sections

Motherboard
3 steps
Camera Lens
1 step

Flags

BackD-Link HD Wi-Fi Camera (DCS-936L)
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications

Introduction

What you need

Step 1

              Motherboard

Place the camera upwards between your thumb and first finger.
Tilt the camera to the best position and loosen the captive linings using a plastic opening tool.
Slide the top cover outwards to separate the upper section from the lower lid using the plastic opening tool.

Place the camera upwards between your thumb and first finger.

Tilt the camera to the best position and loosen the captive linings using a plastic opening tool.

Slide the top cover outwards to separate the upper section from the lower lid using the plastic opening tool.

1024

Step 2

Remove the 6.0mm Phillips #00 screws that secure the back cover to the inner frame.
Lift the rear lid upwards using your fingers and separate it from the internal components and motherboard.

Remove the 6.0mm Phillips #00 screws that secure the back cover to the inner frame.

Lift the rear lid upwards using your fingers and separate it from the internal components and motherboard.

Step 3

Unscrew the motherboard from the frame. There are 3 Phillips #00 5.0mm screws holding it in place.
Then (gently!) remove the motherboard and the lens with your fingers.

Unscrew the motherboard from the frame. There are 3 Phillips #00 5.0mm screws holding it in place.

Then (gently!) remove the motherboard and the lens with your fingers.

Step 4

              Camera Lens

Make sure your hands are dry and you are working in a dry area. To prevent damage, do not touch the lens.
There are two Phillips #00 6.0mm screws keeping the camera in place. Remove the screws first.
Gently unplug the camera from the motherboard, and remove the camera.

Make sure your hands are dry and you are working in a dry area. To prevent damage, do not touch the lens.

There are two Phillips #00 6.0mm screws keeping the camera in place. Remove the screws first.

Gently unplug the camera from the motherboard, and remove the camera.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Author

                                      with 1 other contributor

                    Morgen Jaques

Member since: 09/28/2017

533 Reputation

                                      5 Guides authored                  



                       Badges:
                       9







                                                        +6 more badges

Team

                       Idaho State University, Team S4-G2, Watkins Fall 2017                        

                                                  Member of Idaho State University, Team S4-G2, Watkins Fall 2017 



                    ISU-WATKINS-F17S4G2                     


                                            3 Members                     


                                            10 Guides authored

Paul Williams - Dec 29, 2021

How do I get hold of a replacement lens? Can’t seem to find anyone selling them. Need one for a DCS-2670L

Introduction#

What you need#

#

#

#

#

#

#

Team#

#

Introduction

What you need

Team