Difficulty
Moderate
Steps
5
Time Required
10 minutes
Sections
1
- D-Link dir-645 Disassembly
- 5 steps
Flags
4
In Progress
This guide is a work in progress. Reload periodically to see the latest changes!
Markup Mishap
This guide needs better markups. Help out by correcting or making some markup annotations.
Member-Contributed Guide
An awesome member of our community made this guide. It is not managed by iFixit staff.
Better Introduction
Improve this guide by completing or revising its introduction.
BackD-Link dir-645
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
What you need
Step 1
Pry off the top
- Pry off the top using a plastic pryer
Pry off the top using a plastic pryer
1024
Step 2
Unscrew the bottom screws
- Bottom: unscrew the two philips screws . Note: this probably voids any warranty
Bottom: unscrew the two philips screws . Note: this probably voids any warranty
Step 3
Pry off the bottom
- Carefully pry off the bottom plastic
Carefully pry off the bottom plastic
Step 4
Split the cylinder in half
- Start to pry at the bottom.
- Work your way around until it comes off.
Start to pry at the bottom.
Work your way around until it comes off.
Step 5
Opened!
- The inside consists of the main board ant the antenna, that’s it.
- The 360 deg antenna is connected to the main board with Hirose U.FL connectors and can be easily removed. https://en.wikipedia.org/wiki/Hirose_U.F…
The inside consists of the main board ant the antenna, that’s it.
The 360 deg antenna is connected to the main board with Hirose U.FL connectors and can be easily removed. https://en.wikipedia.org/wiki/Hirose_U.F…
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
One other person completed this guide.
Author
with 1 other contributor
Endorph
Member since: 10/07/2014
1,904 Reputation
8 Guides authored
Badges:
15
+12 more badges