Difficulty
Moderate
Steps
3
Time Required
30 minutes
Sections
1
- Speaker
- 3 steps
Flags
0
BackD-Link DCS-5222L
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
Speaker
- Remove the four rubber pieces to gain access to the screws.
- Remove the four 7mm screws with a #1 Phillips screwdriver.
- Remove the bottom of the camera body.
Remove the four rubber pieces to gain access to the screws.
Remove the four 7mm screws with a #1 Phillips screwdriver.
Remove the bottom of the camera body.
1024
Step 2
- Using safety tweezers, disconnect the 2-wire connector with the red and black leads located close to the ethernet and SD ports.
- Disconnect the cables gently.
Using safety tweezers, disconnect the 2-wire connector with the red and black leads located close to the ethernet and SD ports.
Disconnect the cables gently.
Step 3
- The speaker is circular, black and silver in color with a red and black cord. It is easily removed from the upper body of the camera with your fingers or safety tweezers.
The speaker is circular, black and silver in color with a red and black cord. It is easily removed from the upper body of the camera with your fingers or safety tweezers.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
Author
with 3 other contributors
Jason Munyon
Member since: 10/30/2018
268 Reputation
2 Guides authored
Badges:
4
+1 more badge
Team
UMass Dartmouth, Team S2-G5, Peak Fall 2018
Member of UMass Dartmouth, Team S2-G5, Peak Fall 2018
UMASSD-PEAK-F18S2G5
3 Members
10 Guides authored