D Link Dcs 2630L Wi Fi Camera Microphone Replacement Repair Guide

Difficulty

Moderate

Steps

9

Time Required

                          15 minutes            

Sections

2

• Back casing
• 4 steps
• Microphone
• 5 steps

Flags

1

Better Introduction

Improve this guide by completing or revising its introduction.

• BackD-Link DCS-2630L

• Full Screen

• Options

• History

• Save to Favorites

• Download PDF

• Edit

• Translate

• Get Shareable Link

• Embed This Guide

• Notify Me of Changes

• Stop Notifications

What you need

Step 1

              Back casing               

• Remove the two 9.65 mm screws on the back cover using the Philips head PH00 screw driver.

Remove the two 9.65 mm screws on the back cover using the Philips head PH00 screw driver.

1024

Step 2

• Remove the back casing to expose the circuit board.

Remove the back casing to expose the circuit board.

Step 3

• Detach the gray antenna wires by gently pulling on the side closest to the circuit board.

Detach the gray antenna wires by gently pulling on the side closest to the circuit board.

Step 4

• Detach the speaker wire by gently pulling on the side closest to the body of the camera.

Detach the speaker wire by gently pulling on the side closest to the body of the camera.

Step 5

              Microphone               

• Remove the two 4.35 mm screws on the circuit board using the Philips head PH00 screw driver.

Remove the two 4.35 mm screws on the circuit board using the Philips head PH00 screw driver.

Step 6

• Detach the white plug by gently pulling on the black wires.

Detach the white plug by gently pulling on the black wires.

Step 7

• Remove the circuit board to expose the camera body.
• At the same time, you will need to feed the wires through the circuit board and out the slot in the black plate under the circuit board.

Remove the circuit board to expose the camera body.

At the same time, you will need to feed the wires through the circuit board and out the slot in the black plate under the circuit board.

Step 8

• Gently pull on the grey wire to detach the microphone from the camera body.

Gently pull on the grey wire to detach the microphone from the camera body.

Step 9

• Detach the microphone from the circuit board by gently pulling on the grey wire.

Detach the microphone from the circuit board by gently pulling on the grey wire.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Author

                                      with 1 other contributor 

                    Stanley DeLuna-Dabrowski                     

Member since: 03/21/2018

133 Reputation

                                      1 Guide authored                  



                       Badges:
                       5







                                                        +2 more badges                           

Team

                       IUPUI, Team S4-G2, Baechle Spring 2018                        

                                                  Member of IUPUI, Team S4-G2, Baechle Spring 2018 



                    IUPUI-BAECHLE-S18S4G2                     


                                            3 Members                     


                                            6 Guides authored