Cyberpowerpc Rgb 7 Color Motherboard Replacement Repair Guide

Difficulty

Easy

Steps

Time Required

                          3 minutes

Sections

Plastic Casing
3 steps
LED Backlight
3 steps
Motherboard
2 steps

Flags

BackCyberPowerPC RGB 7 Color
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications

Introduction

What you need

Step 1

              Plastic Casing

Be sure to unplug the keyboard before starting the disassembly.
Remove the two 10 mm length screws using the Phillips head #1 which are located underneath the kickstand of the keyboard and directly next to it.

Be sure to unplug the keyboard before starting the disassembly.

Remove the two 10 mm length screws using the Phillips head #1 which are located underneath the kickstand of the keyboard and directly next to it.

1024

Step 2

Remove the sixteen 5 mm length screws using the Phillips head #2.
One of the screws may be located underneath a manufacturer’s sticker.

Remove the sixteen 5 mm length screws using the Phillips head #2.

One of the screws may be located underneath a manufacturer’s sticker.

Step 3

Lift up and remove the plastic casing.

Lift up and remove the plastic casing.

Step 4

              LED Backlight

Remove the metal backing located directly underneath the white plastic casing.

Remove the metal backing located directly underneath the white plastic casing.

Step 5

Be careful not to pull too hard on the ribbon cable, as it may break.
Disconnect the ribbon cable that connects the LED board to the motherboard.

Be careful not to pull too hard on the ribbon cable, as it may break.

Disconnect the ribbon cable that connects the LED board to the motherboard.

Step 6

Carefully remove the LED board, which should now come free from the casing.

Carefully remove the LED board, which should now come free from the casing.

Step 7

              Motherboard

Now the cell membrane should be exposed, gently lift this part and ensure that the rubber buffers are all intact to the membrane, if not pick up the buffers and set to the side.

Now the cell membrane should be exposed, gently lift this part and ensure that the rubber buffers are all intact to the membrane, if not pick up the buffers and set to the side.

Step 8

Remove the motherboard and its attached cable from the plastic casing. The cord should now come free to replace.

Remove the motherboard and its attached cable from the plastic casing. The cord should now come free to replace.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Author

                                      with 4 other contributors

                    Katherine Von Braunsberg

Member since: 02/12/2018

359 Reputation

                                      3 Guides authored                  



                       Badges:
                       8







                                                        +5 more badges

Team

                       USF Tampa, Team S15-G2, Boczar Spring 2018                        

                                                  Member of USF Tampa, Team S15-G2, Boczar Spring 2018 



                    USFT-BOCZAR-S18S15G2                     


                                            4 Members                     


                                            10 Guides authored

Introduction#

What you need#

Team#

Introduction

What you need

Team