Cyberpowerpc Rgb 7 Color Led Backlight Replacement Repair Guide

Difficulty

Moderate

Steps

6

Time Required

                          3 minutes            

Sections

2

• Plastic Casing
• 3 steps
• LED Backlight
• 3 steps

Flags

0

• BackCyberPowerPC RGB 7 Color

• Full Screen

• Options

• History

• Save to Favorites

• Download PDF

• Edit

• Translate

• Get Shareable Link

• Embed This Guide

• Notify Me of Changes

• Stop Notifications

Introduction

What you need

Step 1

              Plastic Casing               

• Be sure to unplug the keyboard before starting the disassembly.
• Remove the two 10 mm length screws using the Phillips head #1 which are located underneath the kickstand of the keyboard and directly next to it.

Be sure to unplug the keyboard before starting the disassembly.

Remove the two 10 mm length screws using the Phillips head #1 which are located underneath the kickstand of the keyboard and directly next to it.

1024

Step 2

• Remove the sixteen 5 mm length screws using the Phillips head #2.
• One of the screws may be located underneath a manufacturer’s sticker.

Remove the sixteen 5 mm length screws using the Phillips head #2.

One of the screws may be located underneath a manufacturer’s sticker.

Step 3

• Lift up and remove the plastic casing.

Lift up and remove the plastic casing.

Step 4

              LED Backlight               

• Remove the metal backing located directly underneath the white plastic casing.

Remove the metal backing located directly underneath the white plastic casing.

Step 5

• Be careful not to pull too hard on the ribbon cable, as it may break.
• Disconnect the ribbon cable that connects the LED board to the motherboard.

Be careful not to pull too hard on the ribbon cable, as it may break.

Disconnect the ribbon cable that connects the LED board to the motherboard.

Step 6

• Carefully remove the LED board, which should now come free from the casing.

Carefully remove the LED board, which should now come free from the casing.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      2 other people completed this guide.                                             

Author

                                      with 3 other contributors 

                    Braydon Lantz                     

Member since: 02/12/2018

229 Reputation

                                      2 Guides authored                  



                       Badges:
                       7







                                                        +4 more badges                           

Team

                       USF Tampa, Team S15-G2, Boczar Spring 2018                        

                                                  Member of USF Tampa, Team S15-G2, Boczar Spring 2018 



                    USFT-BOCZAR-S18S15G2                     


                                            4 Members                     


                                            10 Guides authored