Cyberpowerpc Fangbook Ms 1763 Cpu Fan Replacement Repair Guide

Difficulty

Moderate

Steps

Time Required

                          10 minutes

Sections

Back Cover
2 steps
CPU Fan
3 steps

Flags

Markup Mishap

This guide needs better markups. Help out by correcting or making some markup annotations.

Better Introduction

Improve this guide by completing or revising its introduction.

BackCyberPowerPC Fangbook MS-1763
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications

What you need

Step 1

              Back Cover

Turn the laptop so the back is facing up.
Use a Phillips #00 screwdriver to remove the seven screws from the bottom cover. These will require a counter-clockwise rotation to remove. A magnet may be helpful to remove screws if they get stuck at the bottom of their inserts.
Find a place to safely keep loose screws. There are seven in total, all the same length - black in color.

Turn the laptop so the back is facing up.

Use a Phillips #00 screwdriver to remove the seven screws from the bottom cover. These will require a counter-clockwise rotation to remove. A magnet may be helpful to remove screws if they get stuck at the bottom of their inserts.

Find a place to safely keep loose screws. There are seven in total, all the same length - black in color.

1024

Step 2

With all screws removed (and safely put aside), you may begin removing the cover. A plastic flat object can help doing this. Note that more force will be required than you might expect
Start by pulling up on the lip, highlighted in Red. This will be at the back of the computer.
Once the back has been lifted up, begin lifting up at the orange side on the left. This will be right next to the back we just pulled up. The right side should come loose at this time; pull up on it as well
Lift and pull on the yellow edge, on the opposite side of the first part we pulled up on. Once this is removed, lift the panel off the computer.
In the steps, the colors mentioned to pull on align with the colors shown on the image. “Pull on the yellow edge” means to pull on the edge marked in yellow on the image

With all screws removed (and safely put aside), you may begin removing the cover. A plastic flat object can help doing this. Note that more force will be required than you might expect

Start by pulling up on the lip, highlighted in Red. This will be at the back of the computer.

Once the back has been lifted up, begin lifting up at the orange side on the left. This will be right next to the back we just pulled up. The right side should come loose at this time; pull up on it as well

Lift and pull on the yellow edge, on the opposite side of the first part we pulled up on. Once this is removed, lift the panel off the computer.

In the steps, the colors mentioned to pull on align with the colors shown on the image. “Pull on the yellow edge” means to pull on the edge marked in yellow on the image

Step 3

              CPU Fan

Locate the CPU Fan inside the computer. It is outlined in red.

Locate the CPU Fan inside the computer. It is outlined in red.

Step 4

Locate the screws holding the fan in place. There are four mounts where they could be.
Use a Phillips Head #00-01 to remove them.

Locate the screws holding the fan in place. There are four mounts where they could be.

Use a Phillips Head #00-01 to remove them.

Step 5

Once all screws are removed, lift up on the fan.
There should be a plug connecting the fan to the laptop. Gently pull up on this plug to remove it.
Note the orientation of the plug. It has to be inserted into the connector the same way.

Once all screws are removed, lift up on the fan.

There should be a plug connecting the fan to the laptop. Gently pull up on this plug to remove it.

Note the orientation of the plug. It has to be inserted into the connector the same way.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Author

                                      with 1 other contributor

                    Brian Chaffin

Member since: 02/08/2018

327 Reputation

                                      3 Guides authored                  



                       Badges:
                       4







                                                        +1 more badge

Team

                       University of North Texas, Team S2-G7, Thomas Spring 2018                        

                                                  Member of University of North Texas, Team S2-G7, Thomas Spring 2018 



                    UNT-THOMAS-S18S2G7                     


                                            4 Members                     


                                            7 Guides authored

Markup Mishap#

Better Introduction#

What you need#

Team#

Markup Mishap

Better Introduction

What you need

Team