Difficulty

Moderate

Steps

8

Time Required

                          15 minutes

Sections

3

  • Top Panel
  • 2 steps
  • Back Panel
  • 2 steps
  • Disc Tray
  • 4 steps

Flags

0

  • BackCyberHome CH-DVD 300

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

What you need

Step 1

              Top Panel
  • Turn the DVD player off. Unplugging the DVD player while it is on may result in damage to the DVD player or an inserted CD.
  • Unplug the DVD player from the wall socket.
  • Locate the 15mm Phillips screws on the left side (1 screw), right side (1 screw), and back (4 screws) of the DVD Player. Use the appropriate Phillips head screwdriver to remove the six screws.

Turn the DVD player off. Unplugging the DVD player while it is on may result in damage to the DVD player or an inserted CD.

Unplug the DVD player from the wall socket.

Locate the 15mm Phillips screws on the left side (1 screw), right side (1 screw), and back (4 screws) of the DVD Player. Use the appropriate Phillips head screwdriver to remove the six screws.

1024

Step 2

  • Remove the top panel of the DVD Player by:
  • Sliding the top panel backwards.
  • Gently lifting the back of the top panel up.

Remove the top panel of the DVD Player by:

Sliding the top panel backwards.

Gently lifting the back of the top panel up.

Step 3

              Back Panel
  • Remove the remaining screws on the back of the DVD player:
  • There will be four 15 mm screws and two 6.3 mm screws.

Remove the remaining screws on the back of the DVD player:

There will be four 15 mm screws and two 6.3 mm screws.

Step 4

  • Remove the back panel by:
  • Lifting up on the back panel.
  • Pulling the back panel backwards from the DVD player.

Remove the back panel by:

Lifting up on the back panel.

Pulling the back panel backwards from the DVD player.

Step 5

              Disc Tray
  • Remove the four 8.1mm screws in each of the corners of the disc tray.

Remove the four 8.1mm screws in each of the corners of the disc tray.

Step 6

  • Orient the device so the front is facing towards you. Remove the disc tray faceplate by lifting up on both corners firmly.
  • The faceplate is located on the front of the DVD player and will prevent the disc tray removal if not removed.

Orient the device so the front is facing towards you. Remove the disc tray faceplate by lifting up on both corners firmly.

The faceplate is located on the front of the DVD player and will prevent the disc tray removal if not removed.

Step 7

  • Detach the ribbon cable from the side of the DVD player by gently pulling it out.

Detach the ribbon cable from the side of the DVD player by gently pulling it out.

Step 8

  • Orient the device so the back is facing towards you. Remove the disk tray out towards the back of the DVD player by lifting it.

Orient the device so the back is facing towards you. Remove the disk tray out towards the back of the DVD player by lifting it.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      One other person completed this guide.

Author

                                      with 3 other contributors 


                    Chris Menezes

Member since: 04/07/2014

630 Reputation

                                      5 Guides authored                  



                       Badges:
                       10







                                                        +7 more badges

Team

                       Cal Poly, Team 6-5, Forte Spring 2014                        

                                                  Member of Cal Poly, Team 6-5, Forte Spring 2014 



                    CPSU-FORTE-S14S6G5                     


                                            5 Members                     


                                            5 Guides authored

Gilvando - Sep 12, 2016

Reply

Bom dia. gostaria de obter informação sobre a referência desse componente CI u7 da placa ficarei muito grato