Difficulty

Easy

Steps

6

Time Required

                          20 minutes

Sections

1

  • Rail Clipper
  • 6 steps

Flags

0

  • BackBlind

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

Before consulting this guide, inspect the wall where your curtain rail clipper is screwed in as it simply just may be the hole in the wall which can no longer support the clipper. If the suggestion has been exercised, you may proceed to use this guide to replace your curtain rail clipper.

What you need

Step 1

              Rail Clipper
  • Unhook the curtain hooks and move your curtain aside for working space.

Unhook the curtain hooks and move your curtain aside for working space.

1024

Step 2

  • Using a Square #0 Screwdriver, unscrew the faulty curtain clipper from the wall in a counter clockwise motion.

Using a Square #0 Screwdriver, unscrew the faulty curtain clipper from the wall in a counter clockwise motion.

Step 3

  • Unscrew the connecting piece of the curtain clipper using the Square #0 screwdriver.
  • Remove the curtain clipper from the wall and the curtain rail.

Unscrew the connecting piece of the curtain clipper using the Square #0 screwdriver.

Remove the curtain clipper from the wall and the curtain rail.

Step 4

  • Position the new curtain clipper directly over the opening the faulty clipper was installed in.
  • Screw in the new curtain clipper using the Square #0 screwdriver and 40 mm square head screw into the wall.
  • Make sure you are screwing the clipper into the preexisting hole in the wall left by the old hangar. If not you may cause damage to your wall and are mounting the clipper incorrectly.

Position the new curtain clipper directly over the opening the faulty clipper was installed in.

Screw in the new curtain clipper using the Square #0 screwdriver and 40 mm square head screw into the wall.

Make sure you are screwing the clipper into the preexisting hole in the wall left by the old hangar. If not you may cause damage to your wall and are mounting the clipper incorrectly.

Step 5

  • Align the connecting piece of the curtain clipper to the clipper as well as the curtain rail.
  • Screw the connecting piece to the clipper and curtain rail until fastened securely using the Square #0 screwdriver and the 4 mm square head screw.

Align the connecting piece of the curtain clipper to the clipper as well as the curtain rail.

Screw the connecting piece to the clipper and curtain rail until fastened securely using the Square #0 screwdriver and the 4 mm square head screw.

Step 6

  • Hook the curtain up when the clipper is fastened to ensure it holds firmly.

Hook the curtain up when the clipper is fastened to ensure it holds firmly.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Author

                                      with 2 other contributors 


                    hakim

Member since: 01/30/2021

133 Reputation

                                      1 Guide authored                  



                       Badges:
                       2

Team

                       York University, Team S1-G19, O'Regan Winter 2021                        

                                                  Member of York University, Team S1-G19, O'Regan Winter 2021 



                    YORK-O'REGAN-W21S1G19                     


                                            2 Members                     


                                            1 Guide authored