Cuisinart Griddler Gr 4N Knobs Replacement Repair Guide

Difficulty

Moderate

Steps

9

Time Required

                          15 - 20 minutes            

Sections

3

• Cooking Surfaces
• 5 steps
• Cuisinart Griddler GR- 4N Disassembly
• 2 steps
• Knobs
• 2 steps

Flags

0

• BackCuisinart Griddler GR-4N

• Full Screen

• Options

• History

• Save to Favorites

• Download PDF

• Edit

• Translate

• Get Shareable Link

• Embed This Guide

• Notify Me of Changes

• Stop Notifications

Introduction

What you need

Step 1

              Cooking Surfaces               

• Ensure device is turned unplugged, cooled down and clean before attempting any replacements.
• Remove cooking plates by pushing in the tabs on each side of the plate at the same time.

Ensure device is turned unplugged, cooled down and clean before attempting any replacements.

Remove cooking plates by pushing in the tabs on each side of the plate at the same time.

1024

Step 2

• Remove the six 5.5mm Phillips #2 screws that secure the bottom heating coil to the device.

Remove the six 5.5mm Phillips #2 screws that secure the bottom heating coil to the device.

Step 3

• Remove the four 30 mm Phillips #2 screws that secure the bottom heating apparatus.

Remove the four 30 mm Phillips #2 screws that secure the bottom heating apparatus.

Step 4

• Remove the single 5.5 mm Phillips #2 screw next to center black button.
• After removing the center screw the metal plate should be free to remove.

Remove the single 5.5 mm Phillips #2 screw next to center black button.

After removing the center screw the metal plate should be free to remove.

Step 5

• Lift the bottom heating apparatus up and remove large black center piece by pushing down on black button while sliding out.
• Realign all surface and put device back together making sure all parts are lined up and heating surfaces are making contact.
• The aligned parts will allow the cooking surfaces to work properly.

Lift the bottom heating apparatus up and remove large black center piece by pushing down on black button while sliding out.

Realign all surface and put device back together making sure all parts are lined up and heating surfaces are making contact.

The aligned parts will allow the cooking surfaces to work properly.

Step 6

              Cuisinart Griddler GR- 4N Disassembly               

• Remove the two 6 mm Phillips #2 screws that secure the knob circuit board.
• Move the circuit board to the side so it is out of the way.

Remove the two 6 mm Phillips #2 screws that secure the knob circuit board.

Move the circuit board to the side so it is out of the way.

Step 7

• Remove the two 6 mm Phillips #2 screws that secure the white plastic LED holder.

Remove the two 6 mm Phillips #2 screws that secure the white plastic LED holder.

Step 8

              Knobs               

• Pinch back plastic arms on knob while pulling out the knob.

Pinch back plastic arms on knob while pulling out the knob.

Step 9

• Pop the new knob back into the hole and the repair is complete.

Pop the new knob back into the hole and the repair is complete.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      2 other people completed this guide.                                             

Author

                                      with 2 other contributors 

                    Kayla Londono                     

Member since: 04/15/2016

614 Reputation

                                      4 Guides authored                  



                       Badges:
                       18







                                                        +15 more badges                           

Team

                       Cal Poly, Team 1-12, Maness Spring 2016                        

                                                  Member of Cal Poly, Team 1-12, Maness Spring 2016 



                    CPSU-MANESS-S16S1G12                     


                                            4 Members                     


                                            6 Guides authored                     

Chris Reece - Jan 12, 2017

Reply

Where do you find the replacement knobs?

Mark Stevens - Feb 19, 2017

Reply

im in same boat can’t find the dials/knobs- 2 of mine are broken and useless

Nick - Mar 7, 2017

Reply

Cuisinart offers NO help. I will have to toss out a $100.00 unit over a $2.00 part.

allen brathwaite - Aug 2, 2017

Reply

I have several cuisinart appliances. I won’t ever buy another. I need one replacement knob, the best they can do is 20 percent off on a new griddler . I can get that from bed bath and beyond. Thanks cuisinart, finding new brands. Cuisinart is dead to me.

benoitcerrina - Nov 13, 2017

Reply

Same here 2 knobs broken in 2 years and no way to find a new one