Cuisinart Griddler Gr 4N Cooking Surfaces Replacement Repair Guide

Difficulty

Moderate

Steps

5

Time Required

                          10 minutes            

Sections

1

• Cooking Surfaces
• 5 steps

Flags

0

• BackCuisinart Griddler GR-4N

• Full Screen

• Options

• History

• Save to Favorites

• Download PDF

• Edit

• Translate

• Get Shareable Link

• Embed This Guide

• Notify Me of Changes

• Stop Notifications

Introduction

What you need

Step 1

              Cooking Surfaces               

• Ensure device is turned unplugged, cooled down and clean before attempting any replacements.
• Remove cooking plates by pushing in the tabs on each side of the plate at the same time.

Ensure device is turned unplugged, cooled down and clean before attempting any replacements.

Remove cooking plates by pushing in the tabs on each side of the plate at the same time.

1024

Step 2

• Remove the six 5.5mm Phillips #2 screws that secure the bottom heating coil to the device.

Remove the six 5.5mm Phillips #2 screws that secure the bottom heating coil to the device.

Step 3

• Remove the four 30 mm Phillips #2 screws that secure the bottom heating apparatus.

Remove the four 30 mm Phillips #2 screws that secure the bottom heating apparatus.

Step 4

• Remove the single 5.5 mm Phillips #2 screw next to center black button.
• After removing the center screw the metal plate should be free to remove.

Remove the single 5.5 mm Phillips #2 screw next to center black button.

After removing the center screw the metal plate should be free to remove.

Step 5

• Lift the bottom heating apparatus up and remove large black center piece by pushing down on black button while sliding out.
• Realign all surface and put device back together making sure all parts are lined up and heating surfaces are making contact.
• The aligned parts will allow the cooking surfaces to work properly.

Lift the bottom heating apparatus up and remove large black center piece by pushing down on black button while sliding out.

Realign all surface and put device back together making sure all parts are lined up and heating surfaces are making contact.

The aligned parts will allow the cooking surfaces to work properly.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      One other person completed this guide.                                             

Author

                                      with 3 other contributors 

                    Kayla Londono                     

Member since: 04/15/2016

614 Reputation

                                      4 Guides authored                  



                       Badges:
                       18







                                                        +15 more badges                           

Team

                       Cal Poly, Team 1-12, Maness Spring 2016                        

                                                  Member of Cal Poly, Team 1-12, Maness Spring 2016 



                    CPSU-MANESS-S16S1G12                     


                                            4 Members                     


                                            6 Guides authored                     

M S - May 13, 2022

Reply

The ‘cooking plates’ on my unit always fall off. I tried bending the tabs to make it tighter - did not help. Any ideas?