Cuisinart Griddler Gr 4N Button Spring Replacement Repair Guide

Difficulty

Moderate

Steps

Time Required

                          30 - 45 minutes

Sections

Cooking Surfaces
5 steps
Button Spring
3 steps

Flags

BackCuisinart Griddler GR-4N
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications

Introduction

What you need

Step 1

              Cooking Surfaces

Ensure device is turned unplugged, cooled down and clean before attempting any replacements.
Remove cooking plates by pushing in the tabs on each side of the plate at the same time.

Ensure device is turned unplugged, cooled down and clean before attempting any replacements.

Remove cooking plates by pushing in the tabs on each side of the plate at the same time.

1024

Step 2

Remove the six 5.5mm Phillips #2 screws that secure the bottom heating coil to the device.

Remove the six 5.5mm Phillips #2 screws that secure the bottom heating coil to the device.

Step 3

Remove the four 30 mm Phillips #2 screws that secure the bottom heating apparatus.

Remove the four 30 mm Phillips #2 screws that secure the bottom heating apparatus.

Step 4

Remove the single 5.5 mm Phillips #2 screw next to center black button.
After removing the center screw the metal plate should be free to remove.

Remove the single 5.5 mm Phillips #2 screw next to center black button.

After removing the center screw the metal plate should be free to remove.

Step 5

Lift the bottom heating apparatus up and remove large black center piece by pushing down on black button while sliding out.
Realign all surface and put device back together making sure all parts are lined up and heating surfaces are making contact.
The aligned parts will allow the cooking surfaces to work properly.

Lift the bottom heating apparatus up and remove large black center piece by pushing down on black button while sliding out.

Realign all surface and put device back together making sure all parts are lined up and heating surfaces are making contact.

The aligned parts will allow the cooking surfaces to work properly.

Step 6

              Button Spring

Depress one of the gray tabs on the side of the housing.

Depress one of the gray tabs on the side of the housing.

Step 7

Pull out the black button and the spring will also come out within it.

Pull out the black button and the spring will also come out within it.

Step 8

Pull out the spring, and insert the replacement spring making sure it is correctly aligned.

Pull out the spring, and insert the replacement spring making sure it is correctly aligned.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      One other person completed this guide.

Author

                                      with 2 other contributors

                    Laine Aro

Member since: 04/11/2016

161 Reputation

                                      1 Guide authored                  



                       Badges:
                       9







                                                        +6 more badges

Team

                       Cal Poly, Team 1-12, Maness Spring 2016                        

                                                  Member of Cal Poly, Team 1-12, Maness Spring 2016 



                    CPSU-MANESS-S16S1G12                     


                                            4 Members                     


                                            6 Guides authored

Introduction#

What you need#

Team#

Introduction

What you need

Team