Difficulty
Easy
Steps
6
Time Required
15 minutes
Sections
1
- Safety Switch
- 6 steps
Flags
0
BackCuisinart DLC-8F
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
Safety Switch
- Remove the four 18 mm Phillips #2 screws from the bottom by prying up the rubber feet to access the screw hole.
Remove the four 18 mm Phillips #2 screws from the bottom by prying up the rubber feet to access the screw hole.
1024
Step 2
- Gently lift the bottom cover from the main body.
Gently lift the bottom cover from the main body.
Step 3
- Remove the two 14 mm Phillips #2 screws holding in the safety switch bracket.
Remove the two 14 mm Phillips #2 screws holding in the safety switch bracket.
Step 4
- Pull out the safety switch bracket with your hand.
Pull out the safety switch bracket with your hand.
Step 5
- Remove the two 19 mm Phillips #2 screws holding the safety switch in the bracket.
Remove the two 19 mm Phillips #2 screws holding the safety switch in the bracket.
Step 6
- Pull off the three wires on the safety switch with your hand by firmly grabbing the wires at the base.
Pull off the three wires on the safety switch with your hand by firmly grabbing the wires at the base.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
2 other people completed this guide.
Author
with 1 other contributor
David Colman
Member since: 01/25/2017
573 Reputation
4 Guides authored
Badges:
9
+6 more badges
Team
Cal Poly, Team 8-6, Banghart Winter 2017
Member of Cal Poly, Team 8-6, Banghart Winter 2017
CPSU-BANGHART-W17S8G6
4 Members
4 Guides authored
