Difficulty
Easy
Steps
5
Time Required
10 minutes
Sections
1
- Power Switch Assembly
- 5 steps
Flags
0
BackCuisinart DLC-8F
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
Power Switch Assembly
- Remove the four 18 mm Phillips #2 screws from the bottom by prying up the rubber feet to access the screw hole.
Remove the four 18 mm Phillips #2 screws from the bottom by prying up the rubber feet to access the screw hole.
1024
Step 2
- Gently lift the bottom cover from the main body.
Gently lift the bottom cover from the main body.
Step 3
- Pull out the three wires coming out of the power switch assembly by firmly grabbing the base of the wires and pulling.
Pull out the three wires coming out of the power switch assembly by firmly grabbing the base of the wires and pulling.
Step 4
- Remove the three 12 mm Phillips #2 screws from the power switch assembly.
Remove the three 12 mm Phillips #2 screws from the power switch assembly.
Step 5
- Pull out the power switch assembly with your hand.
- This might take some jiggling and effort.
Pull out the power switch assembly with your hand.
This might take some jiggling and effort.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
2 other people completed this guide.
Author
with 1 other contributor
David Colman
Member since: 01/25/2017
573 Reputation
4 Guides authored
Badges:
9
+6 more badges
Team
Cal Poly, Team 8-6, Banghart Winter 2017
Member of Cal Poly, Team 8-6, Banghart Winter 2017
CPSU-BANGHART-W17S8G6
4 Members
4 Guides authored
