Difficulty
Easy
Steps
6
Time Required
10 minutes
Sections
1
- Power Cable
- 6 steps
Flags
0
BackCuisinart DLC-8F
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
Power Cable
- Remove the four 18 mm Phillips #2 screws from the bottom by prying up the rubber feet to access the screw hole.
Remove the four 18 mm Phillips #2 screws from the bottom by prying up the rubber feet to access the screw hole.
1024
Step 2
- Gently lift the bottom cover from the main body.
Gently lift the bottom cover from the main body.
Step 3
- Remove the two 62 mm Phillips #2 screws from the cable retaining clip.
Remove the two 62 mm Phillips #2 screws from the cable retaining clip.
Step 4
- Lift off the cable retaining
Lift off the cable retaining
Step 5
- Pull apart the two wires of the power cable at their connections as shown.
Pull apart the two wires of the power cable at their connections as shown.
Step 6
- Lift out the cable.
Lift out the cable.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
2 other people completed this guide.
Author
with 1 other contributor
David Colman
Member since: 01/25/2017
573 Reputation
4 Guides authored
Badges:
9
+6 more badges
Team
Cal Poly, Team 8-6, Banghart Winter 2017
Member of Cal Poly, Team 8-6, Banghart Winter 2017
CPSU-BANGHART-W17S8G6
4 Members
4 Guides authored
nancimoll1 - Jan 15, 2022
Reply
So you pull apart the wires of the power cable and then what? Instructions seem incomplete.
