Difficulty
Moderate
Steps
6
Time Required
10 - 20 minutes
Sections
1
- Internal Wiring
- 6 steps
Flags
Action Shots
Be an action hero! This guide needs images that better demonstrate how to perform specific actions.
BackCuisinart DLC-10S Pro Classic 7-Cup Food Processor
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
What you need
Step 1
Internal Wiring
- Remove the four screws from the bottom of the processor with a Philips Screwdriver.
Remove the four screws from the bottom of the processor with a Philips Screwdriver.
1024
Step 2
- Remove the bottom casing of the processor.
Remove the bottom casing of the processor.
Step 3
- If any wires are frayed, cut them off where they are connected by wire nuts.
If any wires are frayed, cut them off where they are connected by wire nuts.
Step 4
- Detach the wire nut from the other connected wires.
Detach the wire nut from the other connected wires.
Step 5
- Replace the bad wire with a new one of the same gauge.
Replace the bad wire with a new one of the same gauge.
Step 6
- Strip the new wire to the same length as the other wires and connect them to a wire nut.
Strip the new wire to the same length as the other wires and connect them to a wire nut.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
One other person completed this guide.
Author
with 1 other contributor
Riley Carns
Member since: 04/02/2015
279 Reputation
2 Guides authored
Badges:
9
+6 more badges
Team
Cal Poly, Team 24-1, Lancaster Winter 2015
Member of Cal Poly, Team 24-1, Lancaster Winter 2015
CPSU-LANCASTER-W15S24G1
1 Member
2 Guides authored
