Difficulty
Moderate
Steps
9
Time Required
20 minutes
Sections
1
- Selection Knob
- 9 steps
Flags
0
BackCuisinart DCC-1100
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
Selection Knob
- Remove the coffee pot.
Remove the coffee pot.
1024
Step 2
- Open the lid.
- Remove the two 1.6mm Phillips #1 screws from the lid.
Open the lid.
Remove the two 1.6mm Phillips #1 screws from the lid.
Step 3
- Remove the lid from the coffee maker.
Remove the lid from the coffee maker.
Step 4
- Remove the two 1.3mm screws from the display.
Remove the two 1.3mm screws from the display.
Step 5
- Push the display into the maker so that way you can access the screws in the back.
- Remove the four 1mm Phillips #0 screws from the back.
Push the display into the maker so that way you can access the screws in the back.
Remove the four 1mm Phillips #0 screws from the back.
Step 6
- Remove the back panel.
- Remove the front panel from the display.
Remove the back panel.
Remove the front panel from the display.
Step 7
- Remove the three 1mm Phillips #0 screws from the knob.
Remove the three 1mm Phillips #0 screws from the knob.
Step 8
- Remove the knob from the front panel.
Remove the knob from the front panel.
Step 9
- Remove the plastic ring from the knob.
Remove the plastic ring from the knob.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
Author
with 2 other contributors
Josh Harvey
Member since: 01/25/2018
871 Reputation
4 Guides authored
Badges:
10
+7 more badges
Team
USF Tampa, Team S20-G4, Passmore Spring 2018
Member of USF Tampa, Team S20-G4, Passmore Spring 2018
USFT-PASSMORE-S18S20G4
4 Members
7 Guides authored
