Difficulty
Moderate
Steps
7
Time Required
20 minutes
Sections
1
- Hot Plate
- 7 steps
Flags
0
BackCuisinart DCC-1100
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
Hot Plate
- Unplug the coffee maker.
Unplug the coffee maker.
1024
Step 2
- Remove the coffee pot and place the coffee maker upside down.
Remove the coffee pot and place the coffee maker upside down.
Step 3
- Remove the five 1.6mm Phillips #1 screws from the bottom panel.
Remove the five 1.6mm Phillips #1 screws from the bottom panel.
Step 4
- Remove the bottom panel.
Remove the bottom panel.
Step 5
- Remove the two 1.6mm Phillips #0 screws from the retaining bracket on the heating element.
Remove the two 1.6mm Phillips #0 screws from the retaining bracket on the heating element.
Step 6
- Remove the retaining bracket and allow it to hang off of the heating element.
Remove the retaining bracket and allow it to hang off of the heating element.
Step 7
- Remove the hot plate from the heating element.
- New thermal paste should be applied at time of installation.
Remove the hot plate from the heating element.
New thermal paste should be applied at time of installation.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
4 other people completed this guide.
Author
with 2 other contributors
Josh Harvey
Member since: 01/25/2018
871 Reputation
4 Guides authored
Badges:
10
+7 more badges
Team
USF Tampa, Team S20-G4, Passmore Spring 2018
Member of USF Tampa, Team S20-G4, Passmore Spring 2018
USFT-PASSMORE-S18S20G4
4 Members
7 Guides authored
Luciano Muzzatti - Dec 20, 2018
Reply
thank you for this informative display.
I have broken many expensive glass carafs for my cuisinart coffeemaker and finally purchased a cuisinart thermal caraf.
I do not need the hotplate to heat, so what do I do to stop the heating process?
I imagine I would need to remove one of the attached lines to the heating element, yes?
Thanks.
Luciano
Paulette Paglia - Feb 26, 2019
Reply
Hi, Thanks for sharing this information. I have an older Krups coffee maker that still works great but the hot plate is warn. I cannot seem to find a replacement plate for any Krups coffee maker models. Any suggestions? Thanks!
linkev428 - Nov 2, 2019
Reply
Josh
where do I buy the replacement hot plate?? I have the sis 15 coffeemaker and I have googled all over the place?? Thank u
Kathy Johnston - Jan 18, 2020
Reply
Yes, where do you buy the part??
DougB - Mar 28, 2020
Reply
Yes my question is where do you get the new hot plate? Any direction appreciated.
