Difficulty
Difficult
Steps
4
Time Required
40 minutes
Sections
1
- Heating Element
- 4 steps
Flags
0
BackCuisinart DCC-1100
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
Heating Element
- Remove the coffee pot and unplug the maker.
- Flip the coffee maker over so that way the bottom is facing you.
Remove the coffee pot and unplug the maker.
Flip the coffee maker over so that way the bottom is facing you.
1024
Step 2
- Remove the five 1.6mm Phillips #1 screws from the bottom.
- Remove the bottom cover.
Remove the five 1.6mm Phillips #1 screws from the bottom.
Remove the bottom cover.
Step 3
- Remove the two 1.6mm Phillips #0 screws from the heating element.
- Lift up the heating element and remove the hot plate.
Remove the two 1.6mm Phillips #0 screws from the heating element.
Lift up the heating element and remove the hot plate.
Step 4
- Disconnect the heating element.
- Pinch the tube clips and remove from tubes from the heating element.
Disconnect the heating element.
Pinch the tube clips and remove from tubes from the heating element.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
2 other people completed this guide.
Author
with 3 other contributors
Tanvirul Arafin
Member since: 01/25/2018
139 Reputation
1 Guide authored
Badges:
5
+2 more badges
Team
USF Tampa, Team S20-G4, Passmore Spring 2018
Member of USF Tampa, Team S20-G4, Passmore Spring 2018
USFT-PASSMORE-S18S20G4
4 Members
7 Guides authored
