Difficulty
Difficult
Steps
7
Time Required
50 minutes
Sections
1
- Display
- 7 steps
Flags
0
BackCuisinart DCC-1100
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
Display
- Unplug the coffee maker and remove the pot.
Unplug the coffee maker and remove the pot.
1024
Step 2
- Open the lid of the coffee pot.
- Remove the two 1.6mm Phillips #1 screws from inside of the lid.
Open the lid of the coffee pot.
Remove the two 1.6mm Phillips #1 screws from inside of the lid.
Step 3
- Remove the lid.
Remove the lid.
Step 4
- Remove the two 1.3mm Phillips #0 screws from the display.
Remove the two 1.3mm Phillips #0 screws from the display.
Step 5
- Slide the display into the coffee maker so that way you can access the screws in the back.
- Remove the four 1mm Phillips #0 screws from the back of the display.
Slide the display into the coffee maker so that way you can access the screws in the back.
Remove the four 1mm Phillips #0 screws from the back of the display.
Step 6
- Remove the back panel from the display.
- Remove the 1mm Phillips #0 screw from the motherboard.
Remove the back panel from the display.
Remove the 1mm Phillips #0 screw from the motherboard.
Step 7
- Desolder the display from the motherboard.
Desolder the display from the motherboard.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
One other person completed this guide.
Author
with 2 other contributors
Josh Harvey
Member since: 01/25/2018
871 Reputation
4 Guides authored
Badges:
10
+7 more badges
Team
USF Tampa, Team S20-G4, Passmore Spring 2018
Member of USF Tampa, Team S20-G4, Passmore Spring 2018
USFT-PASSMORE-S18S20G4
4 Members
7 Guides authored
