Cuisinart Cpb 380 Disassembly Repair Guide

Difficulty

Moderate

Steps

5

Time Required

                          10 - 25 minutes            

Sections

1

• Cuisinart CPB-380 Disassembly
• 5 steps

Flags

2

Needs Better Images

Better photos will improve this guide. Help out by taking, editing, or uploading new ones!

Better Introduction

Improve this guide by completing or revising its introduction.

• BackCuisinart CPB-380

• Full Screen

• Options

• History

• Save to Favorites

• Download PDF

• Edit

• Translate

• Get Shareable Link

• Embed This Guide

• Notify Me of Changes

• Stop Notifications

What you need

Step 1

              Cuisinart CPB-380 Disassembly               

• Turn the device upside down.
• Remove all four rubber feet by prying them out using the metal spudger.
• Once the rubber feet have been removed, use the Phillips #2 screwdriver to remove all four 13mm screws.

Turn the device upside down.

Remove all four rubber feet by prying them out using the metal spudger.

Once the rubber feet have been removed, use the Phillips #2 screwdriver to remove all four 13mm screws.

1024

Step 2

• Remove the base from the body of the blender.

Remove the base from the body of the blender.

Step 3

• Remove the two 11mm screws securing the power cord using the Phillips #2 screwdriver.
• Gently move the wire aside so that it is not in the way.

Remove the two 11mm screws securing the power cord using the Phillips #2 screwdriver.

Gently move the wire aside so that it is not in the way.

Step 4

• Remove the four 13mm screws that hold the black plastic cover using the Phillips #2 screwdriver.
• Gently remove the black cover.
• Underneath, you will see a clear plastic cover that should be removed as well.

Remove the four 13mm screws that hold the black plastic cover using the Phillips #2 screwdriver.

Gently remove the black cover.

Underneath, you will see a clear plastic cover that should be removed as well.

Step 5

• Cut the zip tie that holds the black, blue, red, and yellow wires together.
• Take care not to cut the wires.

Cut the zip tie that holds the black, blue, red, and yellow wires together.

Take care not to cut the wires.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      2 other people completed this guide.                                             

Author

                                      with 5 other contributors 

                    William Hesse                     

Member since: 09/24/2018

454 Reputation

                                      2 Guides authored                  



                       Badges:
                       11







                                                        +8 more badges                           

Team

                       The Citadel Military College of South Carolina, Team S2-G1, Eggleston Fall 2018                        

                                                  Member of The Citadel Military College of South Carolina, Team S2-G1, Eggleston Fall 2018 



                    CMCSC-EGGLESTON-F18S2G1                     


                                            3 Members                     


                                            3 Guides authored