Crystalview Nb4 35788 Auxiliary Speakers Replacement Repair Guide

Difficulty

Moderate

Steps

6

Time Required

                          45 minutes            

Sections

1

• Auxiliary Speakers
• 6 steps

Flags

Needs Better Images

Better photos will improve this guide. Help out by taking, editing, or uploading new ones!

• BackCrystalView NB4-35788

• Full Screen

• Options

• History

• Save to Favorites

• Download PDF

• Edit

• Translate

• Get Shareable Link

• Embed This Guide

• Notify Me of Changes

• Stop Notifications

Introduction

What you need

Step 1

              Auxiliary Speakers               

• Power off the device before beginning disassembly.
• Using a Phillips #00 Screwdriver, take out the following screws:
• Two 6 mm screws
• Three 4 mm screws
• Four 3 mm screws
• These screws can be taken out in any order.

Power off the device before beginning disassembly.

Using a Phillips #00 Screwdriver, take out the following screws:

Two 6 mm screws

Three 4 mm screws

Four 3 mm screws

These screws can be taken out in any order.

1024

Step 2

• Using a Phillips #00 Screwdriver, remove the screws located under the top two standoffs.

Using a Phillips #00 Screwdriver, remove the screws located under the top two standoffs.

Step 3

• Remove the cover off the back of the device.

Remove the cover off the back of the device.

Step 4

• Two speakers can be found on the device, one in the lower-right corner and one in the lower left-corner.

Two speakers can be found on the device, one in the lower-right corner and one in the lower left-corner.

Step 5

• Gently pull up on the speaker to remove it. Repeat this for the other speaker.

Gently pull up on the speaker to remove it. Repeat this for the other speaker.

Step 6

• De-solder the red and black wires to disconnect the old speaker.
• Be careful while using a soldering iron as it is extremely hot.
• Follow the How To Solder and Desolder Connections guide for help.

De-solder the red and black wires to disconnect the old speaker.

Be careful while using a soldering iron as it is extremely hot.

Follow the How To Solder and Desolder Connections guide for help.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Author

                                      with 2 other contributors 

                    Alex Stokes                     

Member since: 01/12/2017

101 Reputation

                                      1 Guide authored                  



                       Badges:
                       5







                                                        +2 more badges                           

Team

                       Oakland University, Team 2-6, Ruskiewicz Winter 2017                        

                                                  Member of Oakland University, Team 2-6, Ruskiewicz Winter 2017 



                    OAK-RUSKIEWICZ-W17S2G6                     


                                            3 Members                     


                                            6 Guides authored