Difficulty
Moderate
Steps
4
Time Required
20 - 30 minutes
Sections
1
- Speaker
- 4 steps
Flags
Inconsistent Images
Updating the images on this guide to be more consistent with the prerequisites would increase its awesomeness.
BackCrosley CR704
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
Speaker
- Using your Philips head screwdriver, remove the 10 outer black screws from the back of the device.
Using your Philips head screwdriver, remove the 10 outer black screws from the back of the device.
1024
Step 2
- Gently remove the back panel of the device being careful not to unplug any internal wires.
Gently remove the back panel of the device being careful not to unplug any internal wires.
Step 3
- Using your Phillips head screwdriver, remove the 4 brass speaker screws.
- Be careful to not remove the speaker housing screws, which surround the speaker screws.
Using your Phillips head screwdriver, remove the 4 brass speaker screws.
Be careful to not remove the speaker housing screws, which surround the speaker screws.
Step 4
- Carefully pull the wires out of their connections from the back of the speaker.
- Don’t forget which wire goes with which connection!
Carefully pull the wires out of their connections from the back of the speaker.
Don’t forget which wire goes with which connection!
To reassemble, follow these instructions in reverse order. Then test by playing a tune. We suggest “Live at the Apollo” by James Brown.
Cancel: I did not complete this guide.
One other person completed this guide.
Author
with 2 other contributors
MarkAnthony
Member since: 09/22/2013
664 Reputation
5 Guides authored
Badges:
11
+8 more badges
Team
UMass Dartmouth, Team 1-4, Gulbrandsen Fall 2013
Member of UMass Dartmouth, Team 1-4, Gulbrandsen Fall 2013
UMASSD-GULBRANDSEN-F13S1G4
3 Members
5 Guides authored
ninjadaniel66 - Jun 1, 2019
Reply
I’ve got this but the music plays super quietly on the records I’m not able to turn up the sound would this be the solution?