Difficulty
Very easy
Steps
3
Time Required
1 minute
Sections
1
- Control Knobs
- 3 steps
Flags
Inconsistent Images
Updating the images on this guide to be more consistent with the prerequisites would increase its awesomeness.
BackCrosley CR704
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
Safety
- Unplug the power cable if it is plugged in so that you don’t electrocute yourself or loved ones.
- Make sure the turntable cover is closed so that nothing jostles out of place.
Unplug the power cable if it is plugged in so that you don’t electrocute yourself or loved ones.
Make sure the turntable cover is closed so that nothing jostles out of place.
1024
Step 2
- Using a spudger, gain a position of leverage and insert the end of the spudger into the gap between the radio knob and the device.
- With some force, pry the knob off of its peg.
- The knob should slide off smoothly, but beware of flying knobs!
Using a spudger, gain a position of leverage and insert the end of the spudger into the gap between the radio knob and the device.
With some force, pry the knob off of its peg.
The knob should slide off smoothly, but beware of flying knobs!
Step 3
- Applying some force, insert the replacement knob onto the peg.
Applying some force, insert the replacement knob onto the peg.
Test by turning on your radio and playing a tune. We suggest “Last Dance” by Dona Summer.
Cancel: I did not complete this guide.
Author
with 3 other contributors
MarkAnthony
Member since: 09/22/2013
664 Reputation
5 Guides authored
Badges:
11
+8 more badges
Team
UMass Dartmouth, Team 1-4, Gulbrandsen Fall 2013
Member of UMass Dartmouth, Team 1-4, Gulbrandsen Fall 2013
UMASSD-GULBRANDSEN-F13S1G4
3 Members
5 Guides authored