Difficulty

Moderate

Steps

7

Time Required

                          10 - 30 minutes

Sections

1

  • Power Cable
  • 7 steps

Flags

0

  • BackCrosley CR42

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

What you need

Step 1

              Power Cable
  • Turn the device around until you are looking at the line-out port.
  • With a cordless drill or Phillips #0 screwdriver, remove the ten 12-mm screws.

Turn the device around until you are looking at the line-out port.

With a cordless drill or Phillips #0 screwdriver, remove the ten 12-mm screws.

1024

Step 2

  • Gently remove the back of the device. It should be connected by two wires.

Gently remove the back of the device. It should be connected by two wires.

Step 3

  • Gently remove both wires.
  • After de-threading the antenna wire, remove the back of the device and set it aside.

Gently remove both wires.

After de-threading the antenna wire, remove the back of the device and set it aside.

Step 4

  • Locate where the power cable connects to the device.
  • Pick up the device and locate the screw holding the small black peg to the device. Unscrew it and set the screw aside.

Locate where the power cable connects to the device.

Pick up the device and locate the screw holding the small black peg to the device. Unscrew it and set the screw aside.

Step 5

  • With the pliers, remove the wire connectors. You may need to be forceful
  • It is wise to attach a marking in order to recognize how the wires should be reattached.

With the pliers, remove the wire connectors. You may need to be forceful

It is wise to attach a marking in order to recognize how the wires should be reattached.

Step 6

  • Pull apart both groups of wires.
  • After getting your replacement power cord, make sure you recognize how the wires should reattach.

Pull apart both groups of wires.

After getting your replacement power cord, make sure you recognize how the wires should reattach.

Step 7

  • Twist the connecting wires together.
  • Attach the twist-on wire connectors to the exposed wires.

Twist the connecting wires together.

Attach the twist-on wire connectors to the exposed wires.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      One other person completed this guide.

Author

                                      with 7 other contributors 


                    Eric Dybsetter

Member since: 01/26/2014

175 Reputation

                                      1 Guide authored                  



                       Badges:
                       8







                                                        +5 more badges

Team

                       Cal Poly, Team 1-38, Maness Winter 2014                        

                                                  Member of Cal Poly, Team 1-38, Maness Winter 2014 



                    CPSU-MANESS-W14S1G38                     


                                            4 Members                     


                                            5 Guides authored