Crosley Cr42 Bushings Replacement Repair Guide

Difficulty

Moderate

Steps

Time Required

                          15 minutes

Sections

Bushings
8 steps

Flags

BackCrosley CR42
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications

Introduction

What you need

Step 1

              Bushings

Turn the device around so the line out port faces you.
Remove the ten 12 mm screws with the Phillips screwdriver.

Turn the device around so the line out port faces you.

Remove the ten 12 mm screws with the Phillips screwdriver.

1024

Step 2

Pull the line out port toward you so you can view the inside of the Crosley.
Locate the wires that connect the line out port to the inside of the device.

Pull the line out port toward you so you can view the inside of the Crosley.

Locate the wires that connect the line out port to the inside of the device.

Step 3

Pull on the two connections to remove them from the back of the line out port.
Remove the antenna wire from the line out port, then remove the line out port and set it aside.

Pull on the two connections to remove them from the back of the line out port.

Remove the antenna wire from the line out port, then remove the line out port and set it aside.

Step 4

Remove the red and black connection underneath the turntable.

Remove the red and black connection underneath the turntable.

Step 5

Position yourself in front of the turntable to unscrew the three bushing bolts.

Position yourself in front of the turntable to unscrew the three bushing bolts.

Step 6

Unscrew the three bushing bolts with the Phillips screw driver.

Unscrew the three bushing bolts with the Phillips screw driver.

Step 7

Pull the turntable out from the casing.
Remove the three bushing bolts.

Pull the turntable out from the casing.

Remove the three bushing bolts.

Step 8

Pinch the rubber bushing at the bottom, then pull downwards to remove it.
Repeat the previous step for the other two bushings.

Pinch the rubber bushing at the bottom, then pull downwards to remove it.

Repeat the previous step for the other two bushings.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      One other person completed this guide.

Author

                                      with 7 other contributors

                    Roberto Rosila

Member since: 01/26/2014

319 Reputation

                                      3 Guides authored                  



                       Badges:
                       8







                                                        +5 more badges

Team

                       Cal Poly, Team 1-38, Maness Winter 2014                        

                                                  Member of Cal Poly, Team 1-38, Maness Winter 2014 



                    CPSU-MANESS-W14S1G38                     


                                            4 Members                     


                                            5 Guides authored

Introduction#

What you need#

Team#

Introduction

What you need

Team