Difficulty

Difficult

Steps

5

Time Required

                          15 - 30 minutes

Sections

2

  • Disassembling Creative Ziio 7" Back Panel
  • 1 step
  • Battery
  • 4 steps

Flags

1

Better Introduction

Improve this guide by completing or revising its introduction.

  • BackCreative Ziio 7"

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

What you need

Step 1

              Back Panel
  • Remove the back panel by using the plastic opening tool to carefully pry around the panel’s edges.
  • The volume control button and the top power button may fall out during this step.

Remove the back panel by using the plastic opening tool to carefully pry around the panel’s edges.

The volume control button and the top power button may fall out during this step.

1024

Step 2

              Battery
  • Remove the copper plate covering the motherboard by desoldering the ten solder points so that the copper plate is free.
  • The last point is hidden by the soldering iron.
  • Remove the copper plate once all the solder points are undone.

Remove the copper plate covering the motherboard by desoldering the ten solder points so that the copper plate is free.

The last point is hidden by the soldering iron.

Remove the copper plate once all the solder points are undone.

Step 3

  • Remove adhesive tape covering the three wires connected to the motherboard.
  • Desolder the solder points connecting the wires to the mother board.

Remove adhesive tape covering the three wires connected to the motherboard.

Desolder the solder points connecting the wires to the mother board.

Step 4

  • With a spudger, pry the battery from the back of the LCD screen.
  • The battery is attached with double sided foam tape. When prying, the tape will probably not come apart easy. This will result in the tape tearing and leaving residue.

With a spudger, pry the battery from the back of the LCD screen.

The battery is attached with double sided foam tape. When prying, the tape will probably not come apart easy. This will result in the tape tearing and leaving residue.

Step 5

  • Remove old battery and dispose of it responsibly.

Remove old battery and dispose of it responsibly.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      One other person completed this guide.

Author

                                      with 5 other contributors 


                    Bryce Simmons

Member since: 04/16/2013

147 Reputation

                                      2 Guides authored                  



                       Badges:
                       9







                                                        +6 more badges

Team

                       Cal Poly, Team 14-10, Maness Spring 2013                        

                                                  Member of Cal Poly, Team 14-10, Maness Spring 2013 



                    CPSU-MANESS-S13S14G10                     


                                            4 Members                     


                                            13 Guides authored