Creative Zen Vision W Lcd Screen Replacement Repair Guide

Difficulty

Easy

Steps

7

Time Required

                          5 minutes            

Sections

2

• Front Cover
• 3 steps
• LCD Screen
• 4 steps

Flags

1

Confusing Text

Some of this guide’s text is confusing, duplicated, or off-topic. Clarify it by editing!

• BackCreative Zen Vision W

• Full Screen

• Options

• History

• Save to Favorites

• Download PDF

• Edit

• Translate

• Get Shareable Link

• Embed This Guide

• Notify Me of Changes

• Stop Notifications

Introduction

What you need

Step 1

              Front Cover               

• Remove 2 screws (2.5 mm) on the top of the device using Phillips #0.

Remove 2 screws (2.5 mm) on the top of the device using Phillips #0.

1024

Step 2

• Remove 2 screws (2.5 mm) on the bottom of the device using a Phillips #0.

Remove 2 screws (2.5 mm) on the bottom of the device using a Phillips #0.

Step 3

• Use a spudger to get between the cover and the screen. Carefully lift the cover off of the screen without putting too much pressure on the screen.
• When the cover has been lifted off the screen, use your hands to remove it from the device.
• The button pad may fall off when the cover is removed.

Use a spudger to get between the cover and the screen. Carefully lift the cover off of the screen without putting too much pressure on the screen.

When the cover has been lifted off the screen, use your hands to remove it from the device.

The button pad may fall off when the cover is removed.

Step 4

              LCD Screen               

• Use a spudger to separate the metal tabs that hold the screen in place on the right side.
• The screen is still attached underneath with two ribbon cables. Lift it very carefully.

Use a spudger to separate the metal tabs that hold the screen in place on the right side.

The screen is still attached underneath with two ribbon cables. Lift it very carefully.

Step 5

• Put the screen face down so you can see where the ribbon cables are attached.
• Remove the red sticker that covers the ribbon cable connections.

Put the screen face down so you can see where the ribbon cables are attached.

Remove the red sticker that covers the ribbon cable connections.

Step 6

• Use a plastic opening tool to get underneath the black flap on the larger ribbon cable connection and lift it.

Use a plastic opening tool to get underneath the black flap on the larger ribbon cable connection and lift it.

Step 7

• Use a spudger to slide the two small gray tabs away from the ribbon cable connection.
• Remove the screen from the device.

Use a spudger to slide the two small gray tabs away from the ribbon cable connection.

Remove the screen from the device.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      One other person completed this guide.                                             

Author

                                      with 4 other contributors 

                    Tim Wilson                     

Member since: 04/11/2013

135 Reputation

                                      6 Guides authored                  



                       Badges:
                       11







                                                        +8 more badges                           

Team

                       Cal Poly, Team 17-2, Regan Spring 2013                        

                                                  Member of Cal Poly, Team 17-2, Regan Spring 2013 



                    CPSU-REGAN-S13S17G2                     


                                            4 Members                     


                                            8 Guides authored                     

Home Watch - Oct 7, 2020

Reply

Where can I get the screen