Difficulty
Easy
Steps
10
Time Required
5 - 10 minutes
Sections
3
- Front Cover
- 3 steps
- LCD Screen
- 4 steps
- Keypad
- 3 steps
Flags
2
Confusing Text
Some of this guide’s text is confusing, duplicated, or off-topic. Clarify it by editing!
Incorrect Tools
Help make this guide better by using the correct tools in images and/or text.
BackCreative Zen Vision W
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
Front Cover
- Remove 2 screws (2.5 mm) on the top of the device using Phillips #0.
Remove 2 screws (2.5 mm) on the top of the device using Phillips #0.
1024
Step 2
- Remove 2 screws (2.5 mm) on the bottom of the device using a Phillips #0.
Remove 2 screws (2.5 mm) on the bottom of the device using a Phillips #0.
Step 3
- Use a spudger to get between the cover and the screen. Carefully lift the cover off of the screen without putting too much pressure on the screen.
- When the cover has been lifted off the screen, use your hands to remove it from the device.
- The button pad may fall off when the cover is removed.
Use a spudger to get between the cover and the screen. Carefully lift the cover off of the screen without putting too much pressure on the screen.
When the cover has been lifted off the screen, use your hands to remove it from the device.
The button pad may fall off when the cover is removed.
Step 4
LCD Screen
- Use a spudger to separate the metal tabs that hold the screen in place on the right side.
- The screen is still attached underneath with two ribbon cables. Lift it very carefully.
Use a spudger to separate the metal tabs that hold the screen in place on the right side.
The screen is still attached underneath with two ribbon cables. Lift it very carefully.
Step 5
- Put the screen face down so you can see where the ribbon cables are attached.
- Remove the red sticker that covers the ribbon cable connections.
Put the screen face down so you can see where the ribbon cables are attached.
Remove the red sticker that covers the ribbon cable connections.
Step 6
- Use a plastic opening tool to get underneath the black flap on the larger ribbon cable connection and lift it.
Use a plastic opening tool to get underneath the black flap on the larger ribbon cable connection and lift it.
Step 7
- Use a spudger to slide the two small gray tabs away from the ribbon cable connection.
- Remove the screen from the device.
Use a spudger to slide the two small gray tabs away from the ribbon cable connection.
Remove the screen from the device.
Step 8
Keypad
- Peel the orange sticker off of the motherboard.
Peel the orange sticker off of the motherboard.
Step 9
- Lift the keypad from the left side and use tweezers to slide it out to the left.
Lift the keypad from the left side and use tweezers to slide it out to the left.
Step 10
- Use a small flat head screw driver to slide the white tabs away from the ribbon cable connection.
- Remove the ribbon cable from the keypad.
Use a small flat head screw driver to slide the white tabs away from the ribbon cable connection.
Remove the ribbon cable from the keypad.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
Author
with 4 other contributors
Tim Wilson
Member since: 04/11/2013
135 Reputation
6 Guides authored
Badges:
11
+8 more badges
Team
Cal Poly, Team 17-2, Regan Spring 2013
Member of Cal Poly, Team 17-2, Regan Spring 2013
CPSU-REGAN-S13S17G2
4 Members
8 Guides authored
