Creative Zen Vision M Screen Replacement Repair Guide

Difficulty

Moderate

Steps

Time Required

                          15 minutes

Sections

Screen
8 steps

Flags

BackCreative Zen Vision M
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications

Introduction

What you need

Step 1

              Opening the top

Pop off the top plastic on the device with a flat tool like a flathead screwdriver.
Unscrew and remove the two exposed Phillips head screws.

Pop off the top plastic on the device with a flat tool like a flathead screwdriver.

Unscrew and remove the two exposed Phillips head screws.

1024

Step 2

              Opening the device

Work your way around the recess of the device with a flat tool like a flathead screwdriver.
Don’t try attempt to open it from the recess between the buttons and the device.

Work your way around the recess of the device with a flat tool like a flathead screwdriver.

Don’t try attempt to open it from the recess between the buttons and the device.

Step 3

              Disconnecting the battery

Disconnect the wire from the bottom device.
Handle with care as the wires tend to disconnect easily.

Disconnect the wire from the bottom device.

Handle with care as the wires tend to disconnect easily.

Step 4

              Disconnecting the hard drive

In the top right corner, pull the black foam square off to separate the hard drive from the screen.
Handle with care as the hard drive also comes off easily.

In the top right corner, pull the black foam square off to separate the hard drive from the screen.

Handle with care as the hard drive also comes off easily.

Step 5

              Unscrewing from the mother board

Unscrew the seven screws placed around the mother board.
You will need a one millimeter Phillips head screwdriver.
The screws are small, so keep them safely.

Unscrew the seven screws placed around the mother board.

You will need a one millimeter Phillips head screwdriver.

The screws are small, so keep them safely.

Step 6

              Disconnecting the screen from the motherboard

Flip your device upside down so that the motherboard will loosen.
Detach the connector from the motherboard.

Flip your device upside down so that the motherboard will loosen.

Detach the connector from the motherboard.

Step 7

              Removing the screen

Tilt the screen diagonally. Separate the screen and motherboard from the device frame.
Lift the light gray flap to detach the screen from the motherboard.

Tilt the screen diagonally. Separate the screen and motherboard from the device frame.

Lift the light gray flap to detach the screen from the motherboard.

Step 8

              Seperating the digital display

Separate the clear screen frame from the digital display.

Separate the clear screen frame from the digital display.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Author

                                      with 9 other contributors

                    Kirstie G

Member since: 10/12/2016

428 Reputation

                                      4 Guides authored                  



                       Badges:
                       6







                                                        +3 more badges

Team

                       Texas Tech, Team 12-1, Bennett Fall 2016                        

                                                  Member of Texas Tech, Team 12-1, Bennett Fall 2016 



                    TTU-BENNETT-F16S12G1                     


                                            4 Members                     


                                            4 Guides authored

Introduction#

What you need#

Team#

Introduction

What you need

Team