Difficulty

Moderate

Steps

7

Time Required

                          40 minutes

Sections

3

  • Front and Back Cover
  • 2 steps
  • Screen Cover
  • 1 step
  • Display Screen
  • 4 steps

Flags

0

  • BackCreative Nomad Jukebox Zen

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

What you need

Step 1

              Front and Back Cover
  • Use a J0 screwdriver to remove the eight 3.5mm screws.

Use a J0 screwdriver to remove the eight 3.5mm screws.

1024

Step 2

  • Use the plastic opening tool to open the top cover by carefully prying at each corner.

Use the plastic opening tool to open the top cover by carefully prying at each corner.

Step 3

              Screen Cover
  • Once the front face is removed, remove the three 6.8mm J0 screws from the metal cover and remove it.

Once the front face is removed, remove the three 6.8mm J0 screws from the metal cover and remove it.

Step 4

              Display Screen
  • Using the plastic opening tool to pop the metal tab holding the battery in place.
  • By breaking the sticker, it could void your warranty

Using the plastic opening tool to pop the metal tab holding the battery in place.

By breaking the sticker, it could void your warranty

Step 5

  • Use the spudger tool to unclip the screens wiring pigtail clipped into the motherboard.

Use the spudger tool to unclip the screens wiring pigtail clipped into the motherboard.

Step 6

  • Use soldering iron to melt the solder used to hold the display screen to the motherboard.
  • Using soldering gun with care as it becomes extremely hot and can cause burns.

Use soldering iron to melt the solder used to hold the display screen to the motherboard.

Using soldering gun with care as it becomes extremely hot and can cause burns.

Step 7

  • Using the spudger tool, gently pry up the corners of the display screen to remove it.

Using the spudger tool, gently pry up the corners of the display screen to remove it.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Author

                                      with 4 other contributors 


                    Austin Shaw

Member since: 03/08/2017

101 Reputation

                                      1 Guide authored                  



                       Badges:
                       3

Team

                       IUPUI, Team S4-G5, Baechle Spring 2017                        

                                                  Member of IUPUI, Team S4-G5, Baechle Spring 2017 



                    IUPUI-BAECHLE-S17S4G5                     


                                            4 Members                     


                                            5 Guides authored