Difficulty
Moderate
Steps
5
Time Required
15 minutes
Sections
1
- Battery
- 5 steps
Flags
0
BackCreative Nomad Jukebox Zen
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
Battery
- Use a J0 screwdriver to remove the eight 3.5mm screws.
Use a J0 screwdriver to remove the eight 3.5mm screws.
1024
Step 2
- Use plastic opening tool to open top cover by carefully prying at each corner.
Use plastic opening tool to open top cover by carefully prying at each corner.
Step 3
- Once the front face is removed, remove the three 6.8mm J0 screws from the metal cover.
Once the front face is removed, remove the three 6.8mm J0 screws from the metal cover.
Step 4
- Use the plastic opening tool to unclip the metal bracket holding the battery down.
- When sticker is torn warranty is void.
Use the plastic opening tool to unclip the metal bracket holding the battery down.
When sticker is torn warranty is void.
Step 5
- Desolder both red and black wires coming from battery.
- How To Solder and Desolder Connections Use soldering gun with care as it becomes extremely hot and can cause burns.
- Make sure to solder the black and red wires back into the same locations.
Desolder both red and black wires coming from battery.
How To Solder and Desolder Connections Use soldering gun with care as it becomes extremely hot and can cause burns.
Make sure to solder the black and red wires back into the same locations.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
Author
with 4 other contributors
Eli Richter
Member since: 03/08/2017
301 Reputation
3 Guides authored
Badges:
4
+1 more badge
Team
IUPUI, Team S4-G5, Baechle Spring 2017
Member of IUPUI, Team S4-G5, Baechle Spring 2017
IUPUI-BAECHLE-S17S4G5
4 Members
5 Guides authored