Difficulty

Moderate

Steps

9

Time Required

Suggest a time??

Sections

1

  • BL Touch Install
  • 9 steps

Flags

2

In Progress

This guide is a work in progress. Reload periodically to see the latest changes!

Member-Contributed Guide

An awesome member of our community made this guide. It is not managed by iFixit staff.

  • BackEnder 3 Pro and V2 32 Bit

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

What you need

Step 1

              Install Probe and Probe Side Harness
  • Attach the probe to mount with provided M3x 6 screws, positioning the probe with the connection towards the nozzle.
  • Plug in the connection like shown.
  • Final mounting should look like this.
  • Use provided cable ties and attach harness in 3 places. Do not over tighten the cable ties.
  • The probe mounting is a different between the Ender 3 V2 and Ender 3 / Pro but the bulk of this guide applies to all the 32 bit Ender 3 Variants.

Attach the probe to mount with provided M3x 6 screws, positioning the probe with the connection towards the nozzle.

Plug in the connection like shown.

Final mounting should look like this.

Use provided cable ties and attach harness in 3 places. Do not over tighten the cable ties.

The probe mounting is a different between the Ender 3 V2 and Ender 3 / Pro but the bulk of this guide applies to all the 32 bit Ender 3 Variants.

1024

Step 2

              Install Board Side Harness
  • See our Detailed Wiring Diagram
  • The original Z limit switch connection will not be used. Leave unplugged.
  • Use a provided cable tie to attach the BL Touch wires to the rest of the wiring bundle.
  • Assemble the green connector. Wiring must match through the connection but wiring order is not important to start. To be safe, assemble like in the picture.
  • Reinstall the bottom cover, making sure to plug your fan back in.

See our Detailed Wiring Diagram

The original Z limit switch connection will not be used. Leave unplugged.

Use a provided cable tie to attach the BL Touch wires to the rest of the wiring bundle.

Assemble the green connector. Wiring must match through the connection but wiring order is not important to start. To be safe, assemble like in the picture.

Reinstall the bottom cover, making sure to plug your fan back in.

Step 3

              Final Wiring
  • Double check wiring before plugging the green connectors in or powering on the machine! If you mixup wiring, damage can occur.
  • Firmware is different for the Ender 3 / Pro , Ender 3 V2. Please contact us with your board type and machine for firmware and screen files.

Double check wiring before plugging the green connectors in or powering on the machine! If you mixup wiring, damage can occur.

Firmware is different for the Ender 3 / Pro , Ender 3 V2. Please contact us with your board type and machine for firmware and screen files.

Step 4

  • Insert wisdom here.

Insert wisdom here.

Step 5

Step 6

Step 7

Step 8

Step 9

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Author

                                      with 1 other contributor 


                    Tiny Machines 3D

Member since: 11/16/2019

2,695 Reputation

                                      14 Guides authored                  



                       Badges:
                       15







                                                        +12 more badges

Team

                       Tiny Machines 3D                        

                                                  Member of Tiny Machines 3D 



                    Community                     


                                            5 Members                     


                                            31 Guides authored