Creality Cr 20 X Gantry Alignment Repair Guide

Difficulty

Moderate

Steps

1

Time Required

Suggest a time??

Sections

• X Gantry Alignment
• 1 step

Flags

2

In Progress

This guide is a work in progress. Reload periodically to see the latest changes!

Member-Contributed Guide

An awesome member of our community made this guide. It is not managed by iFixit staff.

• BackCreality CR-20

• Full Screen

• Options

• History

• Save to Favorites

• Download PDF

• Edit

• Translate

• Get Shareable Link

• Embed This Guide

• Notify Me of Changes

• Stop Notifications

Step 1

              X Gantry Alignment               

• The CR-20 Pro has solid bed mounts. If any X axis gantry alignment is needed, you can use the “nozzle to bed” distance to check.
• With M2.5 hex, loosen the 2 button head screws on the back side/ right of the X/Z Bracket.
• If the right side is too low and needs to go up, squeeze the bracket and rail together while tightening the button head screws.
• If the right side is high and needs to be lowered, you will squeeze the bottom wheel against the X rail while tightening.
• When properly adjusted, the nozzle will be the same distance from the bed from left to right.
• In some cases, it is necessary to do this process on the left side (near extruder motor) but requires partial disassembly of the machine.

The CR-20 Pro has solid bed mounts. If any X axis gantry alignment is needed, you can use the “nozzle to bed” distance to check.

With M2.5 hex, loosen the 2 button head screws on the back side/ right of the X/Z Bracket.

If the right side is too low and needs to go up, squeeze the bracket and rail together while tightening the button head screws.

If the right side is high and needs to be lowered, you will squeeze the bottom wheel against the X rail while tightening.

When properly adjusted, the nozzle will be the same distance from the bed from left to right.

In some cases, it is necessary to do this process on the left side (near extruder motor) but requires partial disassembly of the machine.

1024

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Author

                                      with 1 other contributor 

                    Tiny Machines 3D                     

Member since: 11/16/2019

2,695 Reputation

                                      14 Guides authored                  



                       Badges:
                       15







                                                        +12 more badges                           

Team

                       Tiny Machines 3D                        

                                                  Member of Tiny Machines 3D 



                    Community                     


                                            5 Members                     


                                            31 Guides authored