Difficulty

Moderate

Steps

6

Time Required

                          15 - 20 minutes

Sections

2

  • Light Bulb
  • 3 steps
  • Sliding Lock Mechanism
  • 3 steps

Flags

0

  • BackCrayola Crayon Maker

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

What you need

Step 1

              Take out the melting tray that is out of place.
  • Press the green arm away from the melting tray. Remove the melting tray.
  • Pop the metal arms out of the green pivot support.

Press the green arm away from the melting tray. Remove the melting tray.

Pop the metal arms out of the green pivot support.

1024

Step 2

              Remove the metal melting tray.
  • Remove the 2 screws (.75cm in length) currently securing the metal melting tray with a Phillips #2 screwdriver.

Remove the 2 screws (.75cm in length) currently securing the metal melting tray with a Phillips #2 screwdriver.

Step 3

              Remove the light bulb
  • The light bulb should now be revealed. Unscrew the burned out bulb and replace with a new bulb.

The light bulb should now be revealed. Unscrew the burned out bulb and replace with a new bulb.

Step 4

              Remove the green base from the crayon maker
  • Flip the crayon maker.
  • Remove six screws (2 cm in length) with a spanner.
  • Remove the green base plate and set it aside.

Flip the crayon maker.

Remove six screws (2 cm in length) with a spanner.

Remove the green base plate and set it aside.

Step 5

              Locate the Plastic arm
  • Locate the clear plastic arm inside the control box.

Locate the clear plastic arm inside the control box.

Step 6

              Adjust/Replace the Plastic Arm
  • If necessary, unscrew the plastic arm with a Phillips #00 Precision screwdriver and readjust the arm until the desired position is reached.
  • If the plastic arm is broken, contact Crayola for replacement parts.

If necessary, unscrew the plastic arm with a Phillips #00 Precision screwdriver and readjust the arm until the desired position is reached.

If the plastic arm is broken, contact Crayola for replacement parts.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Author

                                      with 10 other contributors 


                    Heidi Clarke

Member since: 09/21/2014

222 Reputation

                                      2 Guides authored                  



                       Badges:
                       7







                                                        +4 more badges