Difficulty

Moderate

Steps

7

Time Required

                          5 - 15 minutes

Sections

2

  • Crain Jamb Saw 775 Housing Opening Procedure
  • 3 steps
  • Switch
  • 4 steps

Flags

0

  • BackCrain Jamb Saw 775 2014

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

What you need

Step 1

              Unfasten the saw housing
  • Unplug the power cord before you begin.
  • Use a Phillips #2 screwdriver to remove the eight screws securing the saw housing:
  • Four 20 mm screws
  • Two 50 mm screws
  • Two 55 mm screws

Unplug the power cord before you begin.

Use a Phillips #2 screwdriver to remove the eight screws securing the saw housing:

Four 20 mm screws

Two 50 mm screws

Two 55 mm screws

1024

Step 2

              Remove the housing bracket
  • Remove the metal housing bracket.

Remove the metal housing bracket.

Step 3

              Remove the saw housing
  • Remove the saw housing.

Remove the saw housing.

Step 4

              Unfasten the switch wires
  • Use a Phillips #2 screwdriver to loosen the four screw terminals securing the power cord and motor wires.
  • Take note of which wire connects to which terminal for reassembly purposes.
  • The switch is not secured to the housing; be sure to hold it in place when removing the motor and power cord wires.

Use a Phillips #2 screwdriver to loosen the four screw terminals securing the power cord and motor wires.

Take note of which wire connects to which terminal for reassembly purposes.

The switch is not secured to the housing; be sure to hold it in place when removing the motor and power cord wires.

Step 5

              Disconnect the power cord wires
  • Remove the power cord wires from the main switch.

Remove the power cord wires from the main switch.

Step 6

              Disconnect the motor wires
  • Remove the motor wires from the switch.

Remove the motor wires from the switch.

Step 7

              Remove the switch
  • Remove the switch.

Remove the switch.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Author

                                      with 2 other contributors 


                    Tarun Thiruma

Member since: 11/20/2019

31,630 Reputation

                                      133 Guides authored                  



                       Badges:
                       32







                                                        +29 more badges