Difficulty

Moderate

Steps

12

Time Required

                          30 - 40 minutes

Sections

1

  • Screen
  • 12 steps

Flags

2

Needs Better Images

Better photos will improve this guide. Help out by taking, editing, or uploading new ones!

Missing Details

Some of this guide’s details are missing. Help users by adding tools, difficulty, or time.

  • BackCraig Electronics CMP773

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

What you need

Step 1

              Screen
  • Remove two screws on the charging port side of the tablet using the Phillips #00 screwdriver.

Remove two screws on the charging port side of the tablet using the Phillips #00 screwdriver.

1024

Step 2

  • Insert a plastic opening tool between the screen and the back of the tablet.
  • Insert another opening tool along the same side of the tablet and pry them in opposite directions until the casing pops.
  • Once roughly half of the case has been unlatched, it can be removed by hand.

Insert a plastic opening tool between the screen and the back of the tablet.

Insert another opening tool along the same side of the tablet and pry them in opposite directions until the casing pops.

Once roughly half of the case has been unlatched, it can be removed by hand.

Step 3

  • Use the spudger to gently pry the camera from the casing.

Use the spudger to gently pry the camera from the casing.

Step 4

  • Using your finger, remove the clamp that connects the screen power rib to the motherboard.
  • Using needle nose pliers, remove the ribbon.

Using your finger, remove the clamp that connects the screen power rib to the motherboard.

Using needle nose pliers, remove the ribbon.

Step 5

  • Remove the second screen power connection from the motherboard using the same procedure as step 4.

Remove the second screen power connection from the motherboard using the same procedure as step 4.

Step 6

  • Remove four screws from the motherboard using the Phillips #00 screwdriver.

Remove four screws from the motherboard using the Phillips #00 screwdriver.

Step 7

  • Remove a single screw from the speaker using the Phillips #00 screwdriver.
  • Pry up on the locking tabs with the flat spudger.

Remove a single screw from the speaker using the Phillips #00 screwdriver.

Pry up on the locking tabs with the flat spudger.

Step 8

  • Using needle nose pliers, remove the ground wire from the casing.

Using needle nose pliers, remove the ground wire from the casing.

Step 9

  • Using the plastic opening tool, remove the battery.

Using the plastic opening tool, remove the battery.

Step 10

  • With all screws and components removed, gently remove the motherboard from the casing.

With all screws and components removed, gently remove the motherboard from the casing.

Step 11

  • Insert the spudger in between the screen and case. Work your way around the outside of the screen.

Insert the spudger in between the screen and case. Work your way around the outside of the screen.

Step 12

  • Grasp the exposed screen corner and gently separate the screen from the housing.

Grasp the exposed screen corner and gently separate the screen from the housing.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Author

                                      with 4 other contributors 


                    Justin mersch

Member since: 11/07/2019

205 Reputation

                                      1 Guide authored                  



                       Badges:
                       3

Team

                       IUPUI, Team S3-G4, Harley Fall 2019                        

                                                  Member of IUPUI, Team S3-G4, Harley Fall 2019 



                    IUPUI-HARLEY-F19S3G4                     


                                            4 Members                     


                                            2 Guides authored

Kris Miller - Dec 18, 2021

Reply

What kind of battery does this device specifically use