Craftsman Model 315 10721 Switch Replacement Repair Guide

Difficulty

Easy

Steps

Time Required

                          10 - 15 minutes

Sections

Switch
3 steps

Flags

BackCraftsman Model 315.10721
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications

Introduction

What you need

Step 1

              Switch

Remove the two 1" Phillips screws using a #1 Phillips screwdriver.
Remove the three 1/2" Phillips screws using a #1 Phillips screwdriver.
Once the five screws are removed, lift the handle cover from the saw.

Remove the two 1" Phillips screws using a #1 Phillips screwdriver.

Remove the three 1/2" Phillips screws using a #1 Phillips screwdriver.

Once the five screws are removed, lift the handle cover from the saw.

1024

Step 2

Using a Phillips #1 screwdriver, remove the 1/2" silver screw that is securing the switch.

Using a Phillips #1 screwdriver, remove the 1/2" silver screw that is securing the switch.

Step 3

Using a Phillips #00 screwdriver or a small diameter screwdriver, gently insert it into the leads. When the screwdriver is inserted into the lead, it will release the wire.
The leads are where the black and white wires from the switch are plugged in.
Release both sets of the black and white wires and gently pull them from the leads.
To install the new switch, insert the wires of the new cord in the same way that they were removed.

Using a Phillips #00 screwdriver or a small diameter screwdriver, gently insert it into the leads. When the screwdriver is inserted into the lead, it will release the wire.

The leads are where the black and white wires from the switch are plugged in.

Release both sets of the black and white wires and gently pull them from the leads.

To install the new switch, insert the wires of the new cord in the same way that they were removed.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Author

                                      with 3 other contributors

                    Riley Hilliker

Member since: 10/14/2014

557 Reputation

                                      5 Guides authored                  



                       Badges:
                       11







                                                        +8 more badges

Team

                       Cal Poly, Team 4-47, Amido Fall 2014                        

                                                  Member of Cal Poly, Team 4-47, Amido Fall 2014 



                    CPSU-AMIDO-F14S4G47                     


                                            4 Members                     


                                            5 Guides authored

Introduction#

What you need#

#

#

#

#

#

Team#

#

Introduction

What you need

Team