Cr10S Pro V1 Mosfet Upgrade Repair Guide

Difficulty

Moderate

Steps

2

Time Required

Suggest a time??

Sections

1

• SSR with MOSFET Module
• 2 steps

Flags

In Progress

This guide is a work in progress. Reload periodically to see the latest changes!

Member-Contributed Guide

An awesome member of our community made this guide. It is not managed by iFixit staff.

• BackCR10S Pro V1 MOSFET Upgrade

• Full Screen

• Options

• History

• Save to Favorites

• Download PDF

• Edit

• Translate

• Get Shareable Link

• Embed This Guide

• Notify Me of Changes

• Stop Notifications

Step 1

              MOSFET Wiring and installation               

• The used mounting holes are boxed in green
• The red cable from the bed goes the Vout terminal boxed in red on the picture.
• The black cable from the bed is moved from the -V screw terminal of the Power supply unit(PSU) to the +V screw terminal on the PSU
• The red cable used to connect between the PSU +V and the SSR will now go to the screw terminal boxed in orange
• The new black cable included in the kit will connect between the -V on the PSU and the V- on the MOSFET box in Black.
• Then new 2 pin connector cable will connect to the connector on the MOSFET boxed in blue and to the Control Board Bed positive and negative screw terminal for the bed heater

The used mounting holes are boxed in green

The red cable from the bed goes the Vout terminal boxed in red on the picture.

The black cable from the bed is moved from the -V screw terminal of the Power supply unit(PSU) to the +V screw terminal on the PSU

The red cable used to connect between the PSU +V and the SSR will now go to the screw terminal boxed in orange

The new black cable included in the kit will connect between the -V on the PSU and the V- on the MOSFET box in Black.

Then new 2 pin connector cable will connect to the connector on the MOSFET boxed in blue and to the Control Board Bed positive and negative screw terminal for the bed heater

1024

Step 2

              Bed heater Signal connection               

• The MOSFET Signal connection Connects to the Bed Heater port Blue

The MOSFET Signal connection Connects to the Bed Heater port Blue

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      One other person completed this guide.                                             

Author

                                      with 1 other contributor 

                    AJ Pereira                     

Member since: 05/29/2020

2,049 Reputation

                                      14 Guides authored                  



                       Badges:
                       9







                                                        +6 more badges                           

Team

                       Tiny Machines 3D                        

                                                  Member of Tiny Machines 3D 



                    Community                     


                                            5 Members                     


                                            31 Guides authored                     

Klaus Hackbarth - Jul 26, 2020

Reply

Hi AJ, thx a lot for your help! Klaus from TOP CLASSIC CARS LLC