Difficulty
Moderate
Steps
9
Time Required
1 hour
Sections
1
- Y Axis Linear Rail Kit
- 9 steps
Flags
2
Bullets!
Better coordination with markups and the color/type of bullets will help make this guide more clear!
Member-Contributed Guide
An awesome member of our community made this guide. It is not managed by iFixit staff.
BackCreality CR-10S Pro
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
What you need
Step 1
Machine Prep for linear rail kit
- Remove Bed leveling knobs
- Be careful when lifting the bed off the Y Carriage. The springs may fall when lifting the bed up.
- Lift bed and set to the back left side of the printer
Remove Bed leveling knobs
Be careful when lifting the bed off the Y Carriage. The springs may fall when lifting the bed up.
Lift bed and set to the back left side of the printer
1024
Step 2
Frame Bolts Swap
- Note: uses the stock CR10S Pro Y carriage with Vslot wheels assembly to keep the rails aligned while replacing the frame bolts
- Remove with M5X30 BHCS one at a time
- Replace with M5X30 BHCS each M5x30 SHCS is removed
Note: uses the stock CR10S Pro Y carriage with Vslot wheels assembly to keep the rails aligned while replacing the frame bolts
Remove with M5X30 BHCS one at a time
Replace with M5X30 BHCS each M5x30 SHCS is removed
Step 3
Stock Y carriage Plate Prep
- Remove all Vslot wheels and bolts
- Picture 2 enstop Trigger install
- M5x35 SHCS
- 3x Stock Vslot wheel spacers
- M5 Nylon Ring Lock Nut
Remove all Vslot wheels and bolts
Picture 2 enstop Trigger install
M5x35 SHCS
3x Stock Vslot wheel spacers
M5 Nylon Ring Lock Nut
Step 4
Rail Prep Instructions
- Remove from packaging
- Note, do not touch the rail directly with your hands.
- Wipe down rail with a lint free cloth
- Add grease to the grease port on each side of the rail
Remove from packaging
Note, do not touch the rail directly with your hands.
Wipe down rail with a lint free cloth
Add grease to the grease port on each side of the rail
Step 5
- Pre-insert Spring loaded and use an Allen wrench or screwdriver to help align
- M3 Spring loaded T-nut
- Use the circled Rail mounting positions
- 16x M3x8 SHCS
Pre-insert Spring loaded and use an Allen wrench or screwdriver to help align
M3 Spring loaded T-nut
Use the circled Rail mounting positions
16x M3x8 SHCS
Step 6
Rail Adapter Plate install
- Tighten the screws evenly in an X shape
- 4x Adapter Plate
- 16x M3x6 FHCS
Tighten the screws evenly in an X shape
4x Adapter Plate
16x M3x6 FHCS
Step 7
Y Carriage Plate install
- Belt mounting holes goes on the right side
- Left side screws
- Some early kits are drilled and taped for M5 Screws. The M4x8 FHCS is substituted for a M5x10 FHCS and the M4x10 BHCS substituted for M5x10 BHCS.
- 2x M4x8 FHCS
- Belt mounting holes goes on the right side of the Carriage plate
- Right screw stack order
- M4x10 BHCS - M4 washer - M4 Large OD washer
- Tightened the left side screws first
Belt mounting holes goes on the right side
Left side screws
Some early kits are drilled and taped for M5 Screws. The M4x8 FHCS is substituted for a M5x10 FHCS and the M4x10 BHCS substituted for M5x10 BHCS.
2x M4x8 FHCS
Belt mounting holes goes on the right side of the Carriage plate
Right screw stack order
M4x10 BHCS - M4 washer - M4 Large OD washer
Tightened the left side screws first
Step 8
Belt spacer install
- Belt Bracket Spacer
- 2x M4x20 SHCS
Belt Bracket Spacer
2x M4x20 SHCS
Step 9
Rail stopper install
- M5*10 BHCS
- Acrylic stopper
M5*10 BHCS
Acrylic stopper
Cancel: I did not complete this guide.
One other person completed this guide.
Author
with 3 other contributors
AJ Pereira
Member since: 05/29/2020
2,049 Reputation
14 Guides authored
Badges:
9
+6 more badges
Team
Tiny Machines 3D
Member of Tiny Machines 3D
Community
5 Members
31 Guides authored
