Difficulty
Moderate
Steps
5
Time Required
5 - 10 minutes
Sections
2
- Back Panel
- 2 steps
- CPU Fan
- 3 steps
Flags
1
Needs Better Images
Better photos will improve this guide. Help out by taking, editing, or uploading new ones!
BackGateway M-460
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
Back Panel
- Using the Phillips #1 screwdriver, remove the four 6mm screws on the back of the laptop.
Using the Phillips #1 screwdriver, remove the four 6mm screws on the back of the laptop.
1024
Step 2
- Insert the plastic prying tool and pry the back panel off starting at an edge and moving your way around it.
Insert the plastic prying tool and pry the back panel off starting at an edge and moving your way around it.
Step 3
CPU Fan
- Remove the header by pulling on it with two fingers.
Remove the header by pulling on it with two fingers.
Step 4
- Remove the six 2.5mm screws using a Phillips #1 screwdriver.
Remove the six 2.5mm screws using a Phillips #1 screwdriver.
Step 5
- Remove the fan by moving it to the side and lifting it out of the computer.
Remove the fan by moving it to the side and lifting it out of the computer.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
One other person completed this guide.
Author
with 3 other contributors
Armani Tayeh
Member since: 03/19/2018
432 Reputation
4 Guides authored
Badges:
11
+8 more badges
Team
UMass Dartmouth, Team S3-G2, Peak Spring 2018
Member of UMass Dartmouth, Team S3-G2, Peak Spring 2018
UMASSD-PEAK-S18S3G2
2 Members
14 Guides authored