Difficulty
Easy
Steps
3
Time Required
5 minutes
Sections
1
- Extension Arm
- 3 steps
Flags
Needs More Images
A few more images would make this guide’s procedures crystal clear.
BackCowin E7
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
Extension Arm
- Remove four screws from the extension arm using a TR Torx 10 screwdriver.
Remove four screws from the extension arm using a TR Torx 10 screwdriver.
1024
Step 2
- Pull up on the metal clamp.
- Squeeze the pins on the top and bottom of the side you are trying to remove.
- This will allow the extension bracket to easily slide out of the metal clamp.
Pull up on the metal clamp.
Squeeze the pins on the top and bottom of the side you are trying to remove.
This will allow the extension bracket to easily slide out of the metal clamp.
Step 3
- Replace the damaged extension bracket with a new one.
- To insert the new bracket, remember to squeeze the pins on the side that inserts into the metal clamp.
Replace the damaged extension bracket with a new one.
To insert the new bracket, remember to squeeze the pins on the side that inserts into the metal clamp.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
Author
with 1 other contributor
Jacob Burrer
Member since: 03/26/2022
343 Reputation
2 Guides authored
Badges:
5
+2 more badges
Team
UMass Dartmouth, Team 2-2, Mellen Spring 2022
Member of UMass Dartmouth, Team 2-2, Mellen Spring 2022
UMASSD-MELLEN-S22S2G2
3 Members
4 Guides authored